Fellowes M1-95 Troubleshooting, Storage & Cleaning, Product Registration / Worldwide Warranty

Page 6

TROUBLESHOOTING

Problem

Possible cause

Solution

 

 

 

No ‘power on’ lamp (red LED)

Machine not switched on

Switch on machine at the side and at the

wall socket

 

 

No ‘ready’ lamp after a long

Machine is in a hot or humid area

Move the machine to a cooler and dry area

period (green LED)

 

 

Pouch does not completely seal

Item may be too thick to laminate

Check pass through thickness is correctly

the item

selected and pass through again

 

Pouch has waves or bubbles

Temperature setting may be

Check pouch thickness is correctly selected

incorrect

and pass through again

 

Pouch is lost in the machine

Pouch is jammed

 

 

 

 

 

Pouch was used ‘open end’ first

Press release lever and pull out the item

 

 

 

Pouch was not centered on entry

Jamming

by hand

Pouch was not straight upon entry

 

 

 

 

 

 

Empty pouch was used

 

 

 

 

Pouch is damaged after lamina-

Damaged rollers or adhesive on

Pass cleaning sheets through the machine

tion

rollers

to test and clean rollers

STORAGE & CLEANING

Switch off the machine at the wall. Allow the machine to cool. The outside of the machine can be cleaned with a damp cloth. Do not use solvents or flammable materials to polish the machine. Cleaning sheets can be purchased for use with the machine. When the machine is warm – run the sheets through the machine to clean any residue off the rollers. For optimum performance, it is recommended that cleaning sheets are used with the machine regularly. (Cleaning sheet order code #5320603).

PRODUCT REGISTRATION / WORLDWIDE WARRANTY

Thank you for purchasing a Fellowes product. Please visit www.fellowes.com/register to register your product and benefit from product news, feedback and offers. Product details can be found listed on the rating plate positioned on the rear side or underside of the machine. Fellowes warrants all parts of the laminator to be free of defects in material and workmanship for 1 year from the date of purchase by the original consumer. If any part is found to be defective during warranty period, your sole and exclusive remedy will be repair or replacement, at Fellowes’ option and expense, of the defective part. This warranty does not apply in cases of abuse, mishandling or unauthorized repair. Any implied warranty, including that of merchantability or fitness for particular purpose, is hereby limited in duration to the appropriate warranty period set forth above. In no event shall Fellowes be liable for any consequential damages attributable to

this product. This warranty gives you specific legal rights. You may have other legal rights that vary from this warranty. The duration, terms and conditions of this warranty are valid worldwide, except where different limitations, restrictions or conditions may be required by local law. For more details or to obtain services under this warranty, please contact Fellowes or your dealer.

6

407534C M1-95.indd 6

4/23/13 1:12 PM

Image 6
Contents Personal Laminator Index Laminator Controls Quick Start GuideCapabilities HOW to Laminate Features & TipsSetting UP the Laminator Need HELP?Product Registration / Worldwide Warranty TroubleshootingStorage & Cleaning Problem Possible cause SolutionLES Commandes DE LA Plastifieuse CapacitésSpécifications techniques Comment Plastifier Installation DE LA PlastifieuseStable Ment accessible Fonction « Libération »Entreposage & Nettoyage Problème Cause possible SolutionDépannage Enregistrement DU Produit / Garantie MondialeRendimiento Información técnica Cómo Plastificar ¿NECESITA AYUDA?Función ‘Release’ Almacenamiento Y Limpieza Resolución DE ProblemasProblema Posible causa Solución Registro DEL Producto / Garantía Mundial407534C M1-95.indd 23/13 112 PM Fellowes