Fork Lift Label Locations | GBC Laminator instruction

Installation	F-60 Operation and Maintenance Manual

4.Carefully remove the accessory pack from the skid. The accessory pack should contain:

1 Set, hex wrenches

1 Slitting knife

1 Manual

1 Set, spare fuses

1 Roll of masking tape

1 100% cotton terry cloth

4 Leveling pads

5.Place the foot switch on the pull roll cover to pre- vent the foot switch wire from damage during removal of the machine from the skid.

10.The ramps included with the laminator can be secured to the edge of the crate bottom using the screws left over from the crate disassembly (see Figure 2-2).

11.Have the machine moved off the skid and placed on the floor by licensed riggers.

Roll the machine off by securing included ramps to the edge of the crate bottom using the screws left over from the crate disassembly (See Figure 2-2).

Lift the machine off by applying fork lift truck blades to the two bottom tie bars between the cabi- nets. The fork lift blades must be located at the lift label locations on the tie bars (see Figure 2-4).

WARNING

Do not attempt to move the laminator across anything other than a flat, level surface without trained and qualified riggers. You can be crushed or seriously injured. Steps 6 through 11 should be completed by LICENSED RIGGERS ONLY.

The F-60 Laminator is a large and heavy piece of equipment. It is necessary to employ LICENSED RIGGERS ONLY to move the machine.

GBC Pro-Tech bears no responsibility for personal injury or damage due to moving the laminator improperly.

Fork Lift Label

Locations

F	-6	0	™
	-6

		-T	EC	H
	O		EC
PR	O
PR

6.The machine is supported above the skid by resting on a support saddle under each end of the machine. Remove the three long two by fours that attach to the support saddles.

7.On one side of the machine, remove the lag bolts holding the support saddle to the skid.

8.Using two of the two by fours as levers, carefully lift the end of the machine enough to allow the sad- dle to be removed from the skid and the machine to rest on its wheels.

9.Repeat Steps 7 and 8 for the other end of the machine.

Figure 2-4:

12.Remove any plastic strapping and packing paper taped to the rolls.

CAUTION

Do not use a knife or other sharp instrument

during installation or while servicing the

laminator. You can cause irreparable damage to

the rolls.

13.Remove all packing materials to a safe distance from the laminator.

2-4	© GBC Pro-Tech 1998 July

Laminator specifications

The GBC Laminator is a versatile and reliable tool designed for both home and office use, providing an efficient solution for preserving and enhancing documents through lamination. This innovative device offers a range of features, technologies, and characteristics that make it a popular choice among users who require high-quality lamination for various purposes.

One of the main features of the GBC Laminator is its user-friendly design, which allows for easy operation even for beginners. The intuitive control panel typically includes simple buttons for powering the device on or off, as well as temperature and speed settings. Many models also come with an indicator light that signals when the laminator is ready for use, ensuring optimal performance and preventing damage to documents.

The laminator employs advanced thermal laminating technology, which uses heat to seal plastic film around the document, creating a durable, protective layer. This process is highly effective for preserving important documents, such as certificates, photographs, and menus. Notably, the GBC Laminator is compatible with a variety of pouch sizes and thicknesses, accommodating different project needs. Common thicknesses range from 3 mil to 10 mil, allowing for flexibility in choosing the right level of protection.

Another standout characteristic of the GBC Laminator is its fast lamination speed. Many models can laminate a standard-size document in under a minute, significantly improving efficiency for users with large volumes of work. Additionally, some laminators feature a quick warm-up time, readying the machine for action in as little as five minutes.

The GBC Laminator also emphasizes safety, incorporating intelligent features such as a heat guard and auto shut-off function. This reduces the risk of burns and conserves energy, making it an ideal option for settings where safety is paramount.

Portability is another important aspect, with many GBC Laminators designed to be lightweight and compact. This makes it easy to transport between different locations or store in small spaces when not in use.

In conclusion, the GBC Laminator offers a perfect blend of functionality, safety, and user-friendliness, making it an indispensable tool for anyone needing reliable lamination. Whether for business presentations, creative projects, or personal documentation, the GBC Laminator is a top choice that ensures your materials are preserved and presented beautifully.

Installation

F-60 Operation and Maintenance Manual

Fork Lift Label

Locations

Laminator specifications