7URXEOHVKRRWLQJ

6HFWLRQ 0DLQWHQDQFHDQG			&OHDQLQJMaintenance and Troubleshooting
7URXEOHVKRRWLQJ
-60 Operation and Maintenance Manual
GBC Pro-Tech laminators require minimal mainte-			Tools required:
GBC Pro-Tech laminators require minimal mainte-			•	Adhesive coated board
nance. However, regular maintenance is essential to			•	Adhesive coated board
keep any piece of precision machinery at peak perfor-			• 80% isopropyl alcohol (or dishwashing detergent)
mance. A maintenance schedule and a section of proce-			•	Rubber cement eraser
dures are included in this section.			•	Rubber cement eraser
dures are included in this section.			• Several 100% lint free paper or cotton terry cloths
Table 4-1: Maintenance Schedule			• Several 100% lint free paper or cotton terry cloths
Table 4-1: Maintenance Schedule
			•	Protective rubber gloves

	•	Clean the rolls	To remove heat activated adhesive from laminator
	• Inspect the electrical cord for dam-		To remove heat activated adhesive from laminator
Daily	• Inspect the electrical cord for dam-		rolls:
		age	rolls:
		age
	• Inspect the footswitch cord for dam-
	• Inspect the footswitch cord for dam-
		age				WARNING

	•	Adjust the nip


				Exercise extreme caution while cleaning the
	• Check the chain tension			Exercise extreme caution while cleaning the
	• Check the chain tension			laminator. You can be caught in the turning rolls
Monthly	•	Inspect the area around the laminator		laminator. You can be caught in the turning rolls
Monthly	•	Inspect the area around the laminator		and crushed or burned.
		for possible hazards (dust buildup,
		for possible hazards (dust buildup,
		combustible items stored too close,	While the laminator is still at normal operating temper-
		etc.)	While the laminator is still at normal operating temper-
		etc.)	ature (200-250 ºF), put on the rubber gloves and, using
			ature (200-250 ºF), put on the rubber gloves and, using
Every Six	• Lubricate the grease fittings and		a rubber cement eraser, remove any heat activated
Every Six		chain	adhesive from the rolls. Use “footswitch mode” and
Months		chain	adhesive from the rolls. Use “footswitch mode” and
Months	•	Check wire termination tightness	slow speed to rotate the rolls in reverse.
	•	Check wire termination tightness	slow speed to rotate the rolls in reverse.
						CAUTION
						CAUTION

				If silicone adhesive contacts the upper or lower
				roll, remove it IMMEDIATELY using a rubber
				cement eraser. It can harden within an hour and
					ruin the roll.

						CAUTION

				Do NOT pick or pull heat activated adhesive off
				the rolls when they are cold. You can cause
				irreparable damage to the laminating rolls.

						WARNING

				Do not use compressed air to clean the machine.
				Blowing debris can be forced into places where it
				will later ignite or short electric circuits.

4-1

Laminator specifications

The GBC Laminator is a versatile and reliable tool designed for both home and office use, providing an efficient solution for preserving and enhancing documents through lamination. This innovative device offers a range of features, technologies, and characteristics that make it a popular choice among users who require high-quality lamination for various purposes.

One of the main features of the GBC Laminator is its user-friendly design, which allows for easy operation even for beginners. The intuitive control panel typically includes simple buttons for powering the device on or off, as well as temperature and speed settings. Many models also come with an indicator light that signals when the laminator is ready for use, ensuring optimal performance and preventing damage to documents.

The laminator employs advanced thermal laminating technology, which uses heat to seal plastic film around the document, creating a durable, protective layer. This process is highly effective for preserving important documents, such as certificates, photographs, and menus. Notably, the GBC Laminator is compatible with a variety of pouch sizes and thicknesses, accommodating different project needs. Common thicknesses range from 3 mil to 10 mil, allowing for flexibility in choosing the right level of protection.

Another standout characteristic of the GBC Laminator is its fast lamination speed. Many models can laminate a standard-size document in under a minute, significantly improving efficiency for users with large volumes of work. Additionally, some laminators feature a quick warm-up time, readying the machine for action in as little as five minutes.

The GBC Laminator also emphasizes safety, incorporating intelligent features such as a heat guard and auto shut-off function. This reduces the risk of burns and conserves energy, making it an ideal option for settings where safety is paramount.

Portability is another important aspect, with many GBC Laminators designed to be lightweight and compact. This makes it easy to transport between different locations or store in small spaces when not in use.

In conclusion, the GBC Laminator offers a perfect blend of functionality, safety, and user-friendliness, making it an indispensable tool for anyone needing reliable lamination. Whether for business presentations, creative projects, or personal documentation, the GBC Laminator is a top choice that ensures your materials are preserved and presented beautifully.

-60 Operation and Maintenance Manual

Tools required:

Laminator specifications