![](/images/new-backgrounds/1166409/16640983x1.webp)
L300/L230/L130 User Manual
the console software. If this feature is turned on (set to any whole number up to 999), the same behavior applies, but when a session is disconnected, a timer starts. If the user reconnects before the timer is up, their disconnected session is reconnected to their new session and all their open files and applications are available again. If the timer runs out and the session is still disconnected, the vSpace software will end the session by itself. This makes sure that disconnected sessions do not reserve resources for an indefinite period. By default, this is set to “5.”
∙Support WTSAPI32 Interface: Displays whether or not the vSpace software has turned on support for the WTSAPI32 interface.
∙Disable
∙Do not display last user name: Displays whether or not the vSpace software displays the last user name that logged on using a particular access device. This is sometimes enabled as a security measure.
∙UTMA/UTSA USB port support: Displays whether the administrator has set the vSpace software to
allow using the USB port on L230 access devices.
∙Administrator Password: Displays whether an administrator password is set.
∙Autologon on the Host Station: Displays whether the host PC is set to boot up without the Windows logon screen showing on the host PC.
∙Background Hardware Activation: Displays whether the software silently activates
∙Video Streaming Support: Displays whether the host will provide streaming video to compatible devices. (L300 only)
∙Accelerate Flash Globally: Displays whether the host will leverage video streaming to deliver high- quality Flash to the access device at the cost of higher processor utilization.
∙Compression Ratio
USB-Device Assignment(s)
Note: This feature is only available on the L200 (older model), L230, and L300.
42