Skip Over Perforation: | If you use fanfold paper with your printer, |
| you may need to use this command to |
| instruct the printer to automatically |
| advance the paper over the perforations. |
Character Pitch: | You can change from 10 to 12 or 17.1 |
| charactersperinchandyoucanalsodouble |
| the character width (10 characters per inch |
| to 5 characters per inch, 12 characters per |
| inch to 6 characters per inch and 17.1 |
| characters per inch to 8.5 characters per |
| inch). |
Enhanced/Emphasized: | Prints characters in a bolder type, |
| commonly used for titles and subtitles. |
Underlining: | Underlines a word or group of words. |
Character Sets: | Choose from two different character sets; |
| IBM character set one or two is selectable. |
| There is also a switch selection which |
| enables you to power up the printer in |
| either set and to establish the default |
| character set. |
APA Graphics: | Enables you to draw graphs, charts, and |
| pictures. |
Cancel: | Clears the data in the print buffer. |
What you do next depends on whether you have invested in a software package. If you have, skip to page