6.Press gently on the cartridge until you feel it snap into place. To remove the ribbon cartridge, make sure the print head is moved away from the edge of the platen, then grasp the cartridge on both sides of the print head and lift up.
7.The three-position blue lever located to the left of the ribbon cartridge is used to adjust the print head gap for single or multi-part paper. When single part paper or two part paper is in the printer, slide the blue lever forwards towards the print head. To print on three or four part paper, slide the lever away from the print head.
Column indicator | Paper release lever |
bar | |
Print head gap lever
1 – 4 Setting Up
