| Release and then press the TOF SET button to |
| record the position, then reselect the printer by |
| pressing the SELECT button. |
| 17.1 character per inch can be selected by holding |
| down the TOF SET button when switching the |
| printer supply on. |
SELECT Indicator: | Works together with the SELECT button. Lights |
| when the printer is selected (ready to receive |
| data from the computer). It is not lit when the |
| printer is deselected or during self tests. If an |
| abnormal status is detected during the self test, |
| the indicator flashes. |
FORM FEED Button: | Pressing this button advances the paper to the |
| top of the next page, as set by the TOF SET |
| button. NLQ (Near Letter Quality) print can be |
| selected with this button by holding it down |
| whilst switching on the printer supply. |
ALARM Indicator: | Lights when paper runs out (unless the alarm |
| disable command has been used). Printing stops |
| until the paper supply is replenished. It also |
| lights if a jam is detected whilst using the CSF. It |
| also flashes if high temperatures are detected in |
| the printhead or space motor. Allow the printer |
| to cool down before |
LINE FEED Button: | Advances the paper one line when the printer is |
| deselected. A demonstration page illustrating |
| the print styles available on your printer can be |
| generated by holding down this button whilst |
| switching on the printer supply. When the |
| demonstration page is completed, the printer |
| will automatically revert to 10 cpi Utility mode. |
| An example of this printout is on the next page. |
Operating Your Printer 2 – 3