Dust Collection Cup (EY9X004E)
*Drill bits of which diameter is 20 mm above cannot be inserted through dust collection cup.
*Do not use the tool for cutting other than concrete, mortar and other ceram- ic materials. If used for cutting metal materials, the dust collection cup may be damaged by the metal chip heat.
1.Install a dril bit.
2.Pass the drill bit through A and fix the cup at B by matching with the shape of the support handle.
A B
Operation
Keep the dust collection cup in close contact with the wall surface during operation.
Removal
Hold the base of the dust collection cup for removal.
Base
Please remove after thoroughly get- ting rid of the dust in the dust collec- tion cup.
Storage
Do not store the dust collection cup in a compressed position. If kept in a compressed position, it may be impossible to return to the original shape.
.MAINTENANCE
Use only a dry, soft cloth for wiping the unit. Do not use a damp cloth, thinner, benzine, or other volatile sol- vents for cleaning.
.ACCESSORIES
CAUTION:
To prevent the risk of injury, only use accessory or attachment for its stat- ed purpose.
Dust Collection Cup •EY9X004E
Drill chuck •EY9HX400E
Hammer chuck •EY9HX401E
Chisel Attachment •EY9HX402E
If you need any assistance for more details regarding these accessories, ask your local service center.
- 13 -
