Hammering/drilling switching lever/Speed/Blow Mode selec- tion lever
1.There are four modes available with the combination of Hammering/ drill- ing switching lever and Speed/Blow Mode selection lever.
Select the suitable mode for appli- cation.
2.Operate the mode change af- ter the motor rotation is completely stopped.
Position of | Speed/Blow Mode |
| Recommended | |||||
switching |
| |||||||
selection lever |
| application | ||||||
lever |
| |||||||
|
|
|
|
| ||||
|
|
| Hard blow hammer- | This | mode has hard | |||
|
|
| ing mode | blow hammering which | ||||
|
|
|
| is suitable for concrete | ||||
|
|
|
| drilling. |
|
| ||
|
|
|
| Concrete drill | ||||
|
|
|
|
|
|
|
| |
|
|
| Soft blow hammering | This | mode | is | suitable | |
(Rotation with | ||||||||
mode | for | concrete | drilling | |||||
hammering) |
| with | smaller | diameter | ||||
|
|
|
| drill, or for drilling into | ||||
|
|
|
| soft base material. | ||||
|
|
|
| Small diameter | ||||
|
|
|
| concrete drill | ||||
|
|
| High speed drilling mode | This | mode | is | suitable | |
|
|
|
| for metal | drilling with | |||
|
|
|
| high speed rotation. | ||||
|
|
|
| Metal drill |
| |||
|
|
|
| Metal hole saw | ||||
|
|
|
|
|
|
|
| |
(Rotation only) | Slow speed drilling mode | This | mode | is | suitable | |||
|
|
|
| for wood drill with high | ||||
|
|
|
| torque. |
|
| ||
|
|
|
| Wood drill |
| |||
|
|
|
|
|
|
|
| |
Variable speed control trigger
To set the center of a hole, pull the trig- ger slightly to start the drill rotation slowly.
Support handle
Place the support handle at your favorite position and tighten the handle securely.
Loosen Tighten
Depth gauge
Loosen the support handle and adjust the depth gauge at your favorite depth. After adjusting, tighten the support handle and fix depth gauge.
Depth gauge | Depth of drilling |
|
Installing the Shoulder Strap
CAUTION:
•Install the shoulder strap firmly to the main unit of the tool and check the length of the strap before use.
•Check the condition of the strap and do not use if it is cut or torn etc. There is a risk of injury or damage if used while improperly installed.
•Please wear the shoulder strap se- curely on the shoulder.
There is a risk of injury or damage if it is accidentally dropped.
1.Pass the strap through the strap holders.
2.Pass the strap through the buckles and adjust the length.
Shoulder pad
- 8 -
