.ASSEMBLY

Attaching or Removing Bit Chuck

NOTE: Grease for bit

Grease the oval indentation on the bit with the supplied grease at least once a month.

1. To mount the bit

1-1. Insert a bit into the mounting hole, and turn it slightly to locate an en- gaged position.

1-2. At the engaged position, push the bit as far as it goes. Make sure that the bit is fixed by pulling it.

SDS PLUS type

shank

2. To dismount the bit

2-1. Depress the chuck cover and pull the bit.

While the battery pack release button is held up, ( ) move the battery pack laterally and pull out the pack. ( )

Battery holder

Release lever

-For installation-

To attach the battery pack, line up the alignment marks on the body of the tool and the battery pack, ( ) and insert the battery pack. ()

After you hear the battery pack clicks when inserting it, keep in- serting it firmly until the lever locks it to click once more.

NOTE:

The overheat warning lamp and the battery low warning lamp will flash when the battery pack is not inserted firmly.

. OPERATION

[Main Body] Forward/Reverse lever

Attaching or Removing Bat- tery pack

Battery holder

The battery pack is designed to be in- stalled by proceeding two steps for safety. Make sure the battery pack is installed properly to the main body before use. Battery pack Installation and Removal -For removal-

Push the battery holder ( ).

- 7 -

ForwardReverse

Be sure to set the switch in the cent- er to lock it after use.

Operate the Forward/Reverse lever after the motor rotation is completely stopped.

Page 7
Image 7
Panasonic EY7880 Assembly, Operation, Attaching or Removing Bit Chuck, To mount the bit, To dismount the bit