•When operating the battery pack, make sure the work place is well ventilated.
•When the battery pack is removed from the main body of the tool, re- place the battery pack cover imme- diately in order to prevent dust or dirt from contaminating the battery termi- nals and causing a short circuit.
Battery Pack Life
The rechargeable batteries have a lim- ited life. If the operation time becomes extremely short after recharging, re- place the battery pack with a new one.
Battery Recycling
ATTENTION:
FOR Li-ion Battery Pack, EY9L80
A
Battery charger Charging
Cautions for the
•Make sure the terminals of the bat- tery charger are not contaminated with liquid, grease or other substanc- es before charging the battery pack. If you notice the terminals of the bat- tery charger contaminated, be sure to wipe or take them off before use. The life of the battery pack may ad- versely be affected when the ter- minals are clogged with the dust or dirt which becomes solid with liquid or grease.
•If the temperature of the battery pack falls approximately below
Common Cautions for the Li- ion/Ni-MH/Ni-Cd Battery Pack
•The ambient temperature range is be- tween 0°C (32°F) and 40°C (104°F). If the battery pack is used when the bat- tery temperature is below 0°C (32°F), the tool may fail to function properly.
•When charging a cool battery pack (below 0°C (32°F)) in a warm place, leave the battery pack at the place and wait for more than one hour to warm up the battery to the level of the ambient temperature.
•Cool down the charger when charg- ing more than two battery packs con- secutively.
•Do not insert your fingers into con- tact hole, when holding charger or any other occasions.
CAUTION:
To prevent the risk of fire or dam- age to the battery charger.
•Do not use power source from an engine generator.
•Do not cover vent holes on the charger and the battery pack.
•Unplug the charger when not in use.
Li-ion Battery Pack
NOTE:
Your battery pack is not fully charged at the time of purchase. Be sure to charge the battery before use.
Battery charger (EY0L80)
1. Plug the charger into the AC outlet.
NOTE:
Sparks may be produced when the plug is inserted into the AC power supply, but this is not a problem in terms of safety.
2.Insert the battery pack firmly into the charger.
1Line up the alignment marks and place the battery onto the dock on the charger.
2Slide forward in the direction of the arrow.
Alignment marks
- 10 -
