Connecting the Power Cable
The external power supply and AC power cable are ordered and shipped separately.
The printer must be earthed through the
1.Connect the external power supply cable to the power supply connector located on the back of the back of the printer.
2.Connect the power cable to the external power supply.
3.Plug the power cable into an earthed
The power cable should be connected to a nearby earthed power socket which should remain easily accessible at all times.
The LED turns green indicating the printer is on.
The printer takes about 1.5 seconds to begin operation.
English
User’s Guide | 11 |
80p3gb.p65 | 11 | 12/01/99, 11:43 |