Loading and Removing Paper
This section describes how to load and remove paper. Change the paper when the Status LED flashes. This indicates that the paper is low. The printer will stop. You must change the paper for the printer to resume operating.
Put in the New Paper Roll
Follow these instructions for loading paper.
If this is a new installation, a receipt roll is supplied with the printer.
1.Open the paper cover by firmly pressing the cover latch button.
If you are changing the paper, remove the used supply roll.
2.Place the paper roll so the paper unwinds from the bottom (front).
3.Close the cover firmly.
12 | OKIPOS 80 Plus III |
80p3gb.p65 | 12 | 12/01/99, 11:43 |