Although this page at first appears complicated, upon examination you will see that it actually has 9 areas which are virtually identical. There are three adjustments for each colour, and these adjustments are simply repeated. The whole process should take no more than about 10 minutes.
Each area shows boxed sections, most of which have some colour inside them. Ideally, the centre boxes — those corresponding to the numbers +2 to
Once the test pattern has appeared the printer displays ADJUST #1 ready for adjustment. This relates to area 1 on the test pattern.
4.Examine area #1 on the test pattern closely and identify which of the numbered boxes contains no colour (or which
contains the least colour). That number is the setting which should be entered on the printer menu. Use the ← or → keys to increment or decrement the setting if a number other than 0 is required. When the display shows the number you want, press the ENTER key to enter it. An asterisk (*) will appear in the display.
5.Press the MENU 1 / Menu 2 key to move forward to ADJUST #2.
The rest of the 9 settings are similar. Although this may at | English |
| |
first seem a little complicated, by the time you have |
|
completed 2 or 3 settings it will become fairly a simple and |
|
straight forward procedure to adjust colour registration. |
|
You may find colour registration adjustment quicker and easier if you examine all nine areas first, making a note in each area of the test pattern of any numerical adjustment needed (simply write nothing in the areas which do not need adjustment). You can then speed through the nine adjustments, entering the values you have noted.
VISIBLECOLOURSOME | VISIBLECOLOURNO | ||
| #1 | ||
| |||
| 0 |
| |
| 1 |
| |
| 2 |
| |
| 3 |
| |
| 4 |
| |
| 5 | OR | |
| 6 | ||
| LITTLE | ||
| 7 | ||
|
|
User’s Guide | 17 |