Status Messages and Problem Solving
Message
ON LINE
BUSY
DATA PRESENT
COMPLEX PAGE IMAGE APPROXIMATED
TONER LOW
CHANGE DRUM
FUSER LIFE
BELT LIFE
WAITING FOR MANUAL FEED
PAPER EMPTY
TRAY n NOT INSTALLED
CANNOT USE A6 PAPER ON 2ND TRAY
1ST TRAY INSTALL REQUEST
PAPER CHANGE REQUEST
MEMORY OVERFLOW
COMPLEX PAGE IMAGING INCOMPLETE
Reason and possible action required
Printer is ready.
Job is being processed.
Data received has yet to be printed.
The current page is too complex and is being simplified. This may result in degraded image quality. Try selecting 300dpi resolution. If this happens frequently you may wish to consider purchasing a memory upgrade.
One or more toner cartridges is nearly empty. The status lights will indicate which colour(s).
One of the image drums requires changing (“CCCCC” indicates colour).The status lights will also indicate which colour(s).
The fuser has reached its end of life and requires changing.
The transfer belt unit has reached its end of life and requires changing.
The printer is requesting paper via its front manual feed slot.
The paper has run out.
The indicated paper tray is not installed properly.
The second paper tray cannot feed A6 size paper. Use Tray 1 or the manual feed slot.
The printer is trying to automatically switch to the second paper tray when Tray 1 paper ran out. You must leave Tray 1 in place.
The printer is requesting a different size paper in the indicated tray.
The current page is too complex and cannot be printed. Try selecting 300dpi resolution. If this happens frequently you may wish to consider purchasing a memory upgrade.
This is known as a print overrun and occurs because the page is too complex to be printed. Try selecting 300dpi resolution. If it occurs frequently you may wish to consider purchasing a memory upgrade.
42 | OKIPAGE 8c |