5.Lower the
6.Lower the
7.Pull the small coloured locking lever to the right of the oil roller unit towards you (towards the front of the printer) to lock the oil roller into position.
The coloured labels on the oil roller and the fuser should now be aligned one above the other.
8.Close the top cover and press down firmly at both sides to ensure that it locks down.
Resetting Fuser Oil Roller Count
After installing a new fuser oil roller, the page counter for the roller unit should be reset. This is performed using the User Menus.
1.Hold down the MENU 1 / Menu 2 key for about 2 seconds until the menu item COLOR REG ADJUST appears in the display.
2.Press and release the MENU 1 / Menu 2 key to cycle through the available items. When the display shows OIL ROLLER COUNTER press the ENTER key to reset the roller count.
3.Press the ON LINE key to exit from the User Menu and return to the ON LINE (ready) condition.
English
User’s Guide | 39 |