5.Put the cartridge down gently onto a piece of paper to prevent toner from marking your furniture and to avoid damaging the green drum surface.
CAUTION!
The green image drum surface at the base of the cartridge is very delicate and light sensitive. Do not touch it and do not expose it to normal room light for more than 5 minutes.
6.Repeat this removal procedure for each of the four image drum units.
7.Look into the printer to check whether any sheets of paper are visible on any part of the belt unit.
3
2
1
4
>To remove a sheet with its leading edge at the front of the belt (1), carefully lift the sheet from the belt and pull it forwards into the internal drum cavity and withdraw the sheet.
CAUTION!
Do not use any sharp or abrasive objects to separate sheets from the belt. This may damage the belt surface.