Oki C9500 V2, C7500 V2 manual NetBEUI, Network interface card is not identified

Page 101

Turn the printer off and on again.

Check the network cable is correctly connected.

Change the cable and try again.

If the network resides in a Zone, check the correct Zone name is selected in the Chooser.

Check the Zone name in the utility related to the NIC is the same as the Zone name set in NIC.

Check AppleTalk, which is displayed at the right bottom of the Chooser, is set to Enable. (In some OS versions Network is used instead of AppleTalk.)

Check Ethernet is selected in AppleTalk. (In some OS versions Network is used instead of AppleTalk.)

Check the print driver is selected in the Chooser.

Check the EtherTalk protocol is set to Enable.

Print the NIC settings and confirm that the EtherTalk Port name is not blank.

NetBEUI

The network interface card is not identified.

Turn the printer off and on again.

Check the network cable is correctly connected.

Change the cable and try again.

Check Microsoft network client and NetBEUI have been added to the network section of the control panel.

Check the NetBEUI protocol is set to Enable.

Check the factory setting of the workgroup name is PrintServer and the computer name is ML+ the last six characters of the MAC address.

Troubleshooting 101

Image 101
Contents C7300/C7500 V2 C9300/C9500 Preface Table of Contents Page Introduction Network ConfigurationLPR, FTP, TELNET, HTTP, IPP SpecificationSelf-diagnostic test Available utilities Configuration utilityUtility Features Using Quick Setup Using AdminManager Installation File menu InterfaceStatus Menu FunctionSetup Menu Location Comments Oki Device SetupGeneral Tab Netware Tab TCP/IP TabButton is greyed out LocationComments NetBEUI Tab EtherTalk TabSnmp Tab Printer Trap IPX Off-line Set sending a Trap Enabled or disabled POP Tab Smtp Tab To Address Create a NetWare Queue Server Mode LocationPrint Queue Printer Delete NetWare Object IP Address SetupHelp Menu Option MenuDefault user name and password Using a Web browserMicrosoft Internet Explorer Netscape NavigatorAdjusting printer settings Example for IP address Using Telnet$ telnet Level1 Level2 Level3 Setup Rprinter IPX Print Server 1 ~ Job Timeout Level2 Level3 Level1Paper Error Back to prior menu Using Snmp PrintSuperVision Management utilitySystem requirement Supported Printers Network Interface Supported printer Cards Supported network interface cardsWindowsXP/2000/NT4.0 requires administrator privileges To install the Print SuperVision utilityUninstallation System Requirement Printing utilityOki LPR Windows XP/2000/NT4.0 requires administrator privileges To install the Oki LPR utilityUninstallation Overview Microsoft WindowsWindows Version Method Installation of TCP/IP ProtocolWindows NT Windows 95/98/MeWindows XP WindowsNetwork printer IP address configuration Do you use the NetWare protocol? Do you use the TCP/IP protocol?Do you use the EtherTalk protocol? Do you use the NetBEUI protocol?Windows 95/98/Me Microsoft LPR NT 4.0 requires administrator privilegesOkiLPR Windows 2000 requires administrator privileges Port IPP Windows XP Port IPP Novell Netware IPX Network Printer SettingsNetBEUI Protocol Computer NameWindows 95/98/Me Windows Computer Name OL07DB85 Printer driver configurationNovell Netware IPX Novell Netware IPX Print Server Mode Recommended Remote Printer ModeNovell Netware Supported Versions and ModesPrinting the Network Interface Card Configuration Sheet Setup UtilitiesOki Ndps Gateway Novell NetWare Novell NetWare Novell NetWare IPrint Novell NetWare Unix ConfigurationNetwork Interface card setting Example Logging in to IP address Back to prior menu Please select 1- 99? Sun OS 4.x.x BSD configuration Operating system configurationExample for IP address 192.168.20.127 and host name c7300v2 Example for host name c7300v2Check that lpd printer daemon is activated Sun Solaris 2.x configuration # usr/sbin/lpshut # ping c7300v2 HP-UX 10.x configurationStop the printer spooler Example for the c7300v2 registered as the print server AIX 4.1.5 configurationExample for IP Address 192.168.29.127 and host name c7300v2 Logical printer Printer function LPD PrintingLogical printers Example To delete a print job Job ID 123 on the c7300v2lp BSD-based UnixSystem V-based Unix Example To delete a print job Job ID 456 in the c7300v2lpLogical directories FTP printingLogical directory Printer function Example Logging in with host name c7300v2 or IP addressExample transferring print data test.prn Logout from the network card using the quit commandExample displaying the network card status directory name lp Example displaying network card statusUnix Supported Versions Apple MacintoshAppleTalk Configuration Setup Utilities for Mac OS 8.xConfiguration Macintosh OS Apple Macintosh Self-diagnostic test TroubleshootingPrinter does not print Flash ROM Check registers NGCannot print with lpr and ftp Computer cannot find the network interface cardNetWare Remote Server modeIncorrect User name on the banner Printer cannot find the network interface cardPostScript error occurs if a Banner Page is printed Print Server modeNot identified by the Chooser and the Setup Utility EtherTalkNetwork interface card is not identified NetBEUITroubleshooting Glossary Error writing to Prn1Troubleshooting APPENDIX- E-MAIL Alert Function Page C7300/C7500/C9300/C9500

C7500 V2, C9500 V2 specifications

The Oki C9500 V2 and C7500 V2 are professional-grade color printers designed to meet the high demands of businesses and creative environments. Both models utilize advanced LED technology, which results in unparalleled print quality and efficiency.

One of the standout features of the C9500 V2 is its ability to produce rich, vivid colors thanks to Oki's proprietary High Definition Color technology. This ensures that images and graphics are reproduced with striking clarity and detail, making it ideal for marketing materials, brochures, and other high-impact documents. The resolution reaches an impressive 1200 x 1200 dpi, guaranteeing that every print is of the highest quality.

The Oki C7500 V2, while slightly more compact, does not compromise on performance. It is also built on LED technology, which provides fast print speeds and low energy consumption. The C7500 V2 can produce up to 34 pages per minute for both color and monochrome prints, significantly improving productivity in a fast-paced work environment.

Another notable characteristic of both models is their versatility. They can handle a wide range of media types, including heavy-weight stocks, labels, and banners, with impressive handling capabilities. This flexibility allows businesses to explore various printing applications without the need for multiple devices.

In addition to remarkable print capabilities, the Oki C9500 V2 and C7500 V2 offer robust connectivity options. They come equipped with USB and network connectivity, allowing for seamless integration into any office setup. Cloud printing and mobile printing features further enhance their usability, enabling users to print from smartphones and tablets with ease.

Both models are designed with user-friendliness in mind, featuring intuitive control panels and easy-to-navigate menus. Maintenance is straightforward, with consumables that are easy to replace, reducing downtime and ensuring the printer remains operational when needed most.

Environmentally conscious users will appreciate the energy-saving features of the Oki printers. The devices meet ENERGY STAR standards, promoting lower power consumption without sacrificing performance.

In summary, the Oki C9500 V2 and C7500 V2 stand out in the market for their combination of advanced technologies, high-quality output, versatility, and user-friendly features. They are suitable for businesses seeking reliable, efficient, and high-performance printers that deliver exceptional results for all printing needs.