FTP printing
FTP (File Transfer Protocol) is used for transferring a file with TCP/IP. If the print data is sent to a logical printer via FTP, it is printed.
Refer to the workstation’s manual for details of the ftp command. The following explanation uses print file test.prn with printer name c7300v2_lp as an example.
Logical directories
The printer’s network interface includes three logical directories.
lp must be used for printing a file created using the printer driver.
sjis must be used for printing a text file of Shift JIS Kanji code.
euc must be used for the printing a text file of the EUC Kanji code
Logical directory Printer function
lp | For direct output |
sjis | For Shift JIS Kanji converted output |
euc | For EUC Kanji converted output |
>jis and euc function only as PostScript printers.
>You can not send data to the root directory.
1.Login to the network interface card.
When printing with ftp, use any values for name and password. However, if the user name is [root], the password set under TELNET or the utility is required. See the appropriate section for details.
Example: Logging in with host name c7300v2 (or IP address 192.168.20.127).
#ftp c7300v2 (or ftp 192.168.20.127 Connected to c7300v2
220 EthernetBoard OkiLAN 8100e Ver 01.50 FTP Server Name (c7300v2:<none>) : root
331 Password required. Password:<CR>
230 User Logged in ftp>
UNIX 89