Oki C7000 setup guide Remove the Shipping Materials, Prepare the Image Drums

Page 5

5 Remove the Shipping Materials

☐Remove any shipping tape and packaging.

☐Pull up on the release latch (1) and open the cover.

☐Remove the cardboard shipping restraint (1) from behind the LED heads.

☐Pull forward on the blue lever (2), remove the orange transport lock (3) from the end of the fuser, then push the lever (2) toward the back of the printer.

6 Prepare the Image Drums

☐Lift out the four image drums ☐ Remove the protective sheet (1). Push the

and place them on a flat	tab (2) in the direction of the arrow and
surface.	remove the blanking plate (3) from each
	drum.

Cyan

Magenta

Yellow

Black

☐Place the drums back in the printer, being careful to match them to the correct color position.

Image 5

Contents Network Install see pp -18 h USB Install see pp Complete Setup GuideOn-Line PrintedUnpack Select a locationRecord the Serial Number Check ComponentsPrepare the Image Drums Remove the Shipping MaterialsImage drum closest to the front of the printer Install the Toner Cartridges10Print the Demo Connect to PowerLoad Paper Windows & Novell Network Install Summary Network Install Windows & NovellViewing the Installed Network User’s Guide On-Line Network User’s GuideWorkstation Drivers/Software Network Software What’s AvailableNetwork Utilities, including TCP/IP Windows 2000 & NT Printer Network Configuration OverviewNovell NDS/Bindery 4.x Novell Ndps 5.x and aboveClick the Network and Admin Software button Network Administration Software, TCP/IP Windows 2000 & NTSet Permanent static IP Use Network ProtocolInstall OkiView32 Network Administration Software, Novell SetupConfigure Novell with OkiView32 for Novell Click Start Settings PrintersClick Start Settings Printer Clients with Windows Me & Windows 98/95 Pull InstallationClient Computers Click the Device Options tabUSB Port Connection USB Install WindowsWindows Drivers Supplied Activate the Duplex Unit Internal Hard Drive Printer Driver USB Install the SoftwareParallel Install the Software Parallel Install WindowsTo Install the Software Drivers SuppliedNetwork Install the Driver Network Install MacintoshNetwork Install the OkiNet Software Utilities Network Create the PPDNetwork On-Line Manuals Select LaserWriter Click Printer Setup Click ConfigureRequirements To Load the ManualsUSB Install the Driver USB Install MacintoshUSB Create the Desktop Printer Under PostScript Printer Description PPD file, click ChangeUSB On-Line Manuals Set the Color Balance Why Set the Color Balance?Setting the Color Balance Default Media Settings Check the Media SettingsPrint Paths InputPrinting Transparencies Changing the Default SettingsPrinting Labels Print PathPrinting Thick Paper Card Stock, Index Paper Changing Media Settings for MP Tray in the Printer Menu Changing Media Settings for Tray1 in the Printer MenuOther Special Media Set Media Weight Transparencies Only Set Media TypePower Save Mode Check the Printer SettingsDuplex Mode Printer EmulationPrint a Sample File Install the Handy Reference59333502