Oki C7000 setup guide Install the Toner Cartridges, Image drum closest to the front of the printer

Page 6

7 Install the Toner Cartridges

Unpack the black toner cartridge and shake it back and forth.

Hold the cartridge in a horizontal position and remove the tape.

Hold the cartridge in the vertical position, with the port (1) on the left and the blue lock lever (2) on the right.

A

Lower the left end of the cartridge into the

image drum closest to the front of the printer,

 

 

so that the tube (1) on the drum slides into the

B

port (2) on the toner cartridge.

 

B

Press the cartridge toward the left slightly, then

 

 

lower the right end, aligning the white tab (3)

 

with the groove (4) in the drum.

C

 

A

 

C

Push the lock lever (5) toward the back of the

 

 

printer until it stops.

 

To avoid damage to the printheads, be sure to

 

! push the lock lever (5) back as far as it will

 

go.

Cyan

 

Magenta

Repeat the process for each toner

Yellow

cartridge, being careful to match the

toner color to the drum color.

Black

Before closing the cover, check to be

! sure all the toner cartridge lock

 

 

levers (blue) are pushed back as far

 

as they will go.

 

Close the cover.

6

 

Image 6
Contents Setup Guide Network Install see pp -18 h USB Install see pp CompletePrinted On-LineSelect a location UnpackCheck Components Record the Serial NumberRemove the Shipping Materials Prepare the Image DrumsInstall the Toner Cartridges Image drum closest to the front of the printerConnect to Power Load Paper10Print the Demo Viewing the Installed Network User’s Guide Network Install Windows & NovellWindows & Novell Network Install Summary On-Line Network User’s GuideNetwork Software What’s Available Network Utilities, includingWorkstation Drivers/Software Novell NDS/Bindery 4.x Printer Network Configuration OverviewTCP/IP Windows 2000 & NT Novell Ndps 5.x and aboveSet Permanent static IP Network Administration Software, TCP/IP Windows 2000 & NTClick the Network and Admin Software button Use Network ProtocolConfigure Novell with OkiView32 for Novell Network Administration Software, Novell SetupInstall OkiView32 Click Start Settings PrintersClient Computers Clients with Windows Me & Windows 98/95 Pull InstallationClick Start Settings Printer Click the Device Options tabUSB Install Windows Windows Drivers SuppliedUSB Port Connection USB Install the Software Activate the Duplex Unit Internal Hard Drive Printer DriverTo Install the Software Parallel Install WindowsParallel Install the Software Drivers SuppliedNetwork Install the OkiNet Software Utilities Network Install MacintoshNetwork Install the Driver Network Create the PPDRequirements Select LaserWriter Click Printer Setup Click ConfigureNetwork On-Line Manuals To Load the ManualsUSB Create the Desktop Printer USB Install MacintoshUSB Install the Driver Under PostScript Printer Description PPD file, click ChangeUSB On-Line Manuals Why Set the Color Balance? Setting the Color BalanceSet the Color Balance Print Paths Check the Media SettingsDefault Media Settings InputPrinting Labels Changing the Default SettingsPrinting Transparencies Print PathPrinting Thick Paper Card Stock, Index Paper Other Special Media Set Media Weight Changing Media Settings for Tray1 in the Printer MenuChanging Media Settings for MP Tray in the Printer Menu Transparencies Only Set Media TypeDuplex Mode Check the Printer SettingsPower Save Mode Printer EmulationInstall the Handy Reference Print a Sample File59333502