Oki C7000 setup guide Load Paper, Connect to Power, 10Print the Demo

Page 7

Turn the printer on and wait for it to warm up.

The display will read

ONLINE .AUTO TRAY1

8 Load Paper

For information on usable print media, see the Handy Reference Guide.

						☐ Fan the paper (max.



☐ Pull the paper tray out of the
printer and adjust the paper						530 sheets 20-lb.
guides (1) and rear paper						paper) and load it.
stopper (2) for the size paper						Keep it below the
you are using.						“PAPER FULL” mark.

9 Connect to Power

☐If necessary, lift out the paper media indicator and reinsert it with the proper media size showing

Paper Gauge:

Indicates the amount of paper left in the tray.

☐Push the tray back in.

☐Attach the power cord to the back of the printer.

☐Connect to grounded power socket.

☐

10Print the Demo Page

☐ Print out the Demo page:

a Press Menu repeatedly until INFORMATION MENU appears.

b Press ITEM - repeatedly until DEMO1 displays.

c Press Select.

The Demo page prints and the printer goes back on line.

Image 7

Contents Network Install see pp -18 h USB Install see pp Complete Setup GuideOn-Line PrintedUnpack Select a locationRecord the Serial Number Check ComponentsPrepare the Image Drums Remove the Shipping MaterialsImage drum closest to the front of the printer Install the Toner CartridgesLoad Paper Connect to Power10Print the Demo On-Line Network User’s Guide Network Install Windows & NovellWindows & Novell Network Install Summary Viewing the Installed Network User’s GuideNetwork Utilities, including Network Software What’s AvailableWorkstation Drivers/Software Novell Ndps 5.x and above Printer Network Configuration OverviewTCP/IP Windows 2000 & NT Novell NDS/Bindery 4.xUse Network Protocol Network Administration Software, TCP/IP Windows 2000 & NTClick the Network and Admin Software button Set Permanent static IPClick Start Settings Printers Network Administration Software, Novell SetupInstall OkiView32 Configure Novell with OkiView32 for NovellClick the Device Options tab Clients with Windows Me & Windows 98/95 Pull InstallationClick Start Settings Printer Client ComputersWindows Drivers Supplied USB Install WindowsUSB Port Connection Activate the Duplex Unit Internal Hard Drive Printer Driver USB Install the SoftwareDrivers Supplied Parallel Install WindowsParallel Install the Software To Install the SoftwareNetwork Create the PPD Network Install MacintoshNetwork Install the Driver Network Install the OkiNet Software UtilitiesTo Load the Manuals Select LaserWriter Click Printer Setup Click ConfigureNetwork On-Line Manuals RequirementsUnder PostScript Printer Description PPD file, click Change USB Install MacintoshUSB Install the Driver USB Create the Desktop PrinterUSB On-Line Manuals Setting the Color Balance Why Set the Color Balance?Set the Color Balance Input Check the Media SettingsDefault Media Settings Print PathsPrint Path Changing the Default SettingsPrinting Transparencies Printing LabelsPrinting Thick Paper Card Stock, Index Paper Transparencies Only Set Media Type Changing Media Settings for Tray1 in the Printer MenuChanging Media Settings for MP Tray in the Printer Menu Other Special Media Set Media WeightPrinter Emulation Check the Printer SettingsPower Save Mode Duplex ModePrint a Sample File Install the Handy Reference59333502