Printer Menus
It is possible, using the front panel buttons, to change the default configuration of your printer to accommodate your software application, specific paper size, method of paper feed and interface connection.
The menu structure consists of three levels:
Category
Each category consists of several items, selected by pressing the MENU 1/Menu 2 button (with the printer
Item
Each item consists of several parameters displayed on the upper line in the message window by pressing the MENU 1/ Menu 2 button.
Parameter
The parameter will be displayed on the lower line of the message window by pressing the left & right buttons. When the required parameter is displayed press the ENTER button.
If your software can control a feature that is also controlled in the printer menu, the software will override the menu setting. Use your software to control printer features whenever possible.
Viewing and Modifying Menu Settings
Two menus are available:
1.Press ON LINE to place the printer
2.Enter Menu 1 or Menu 2 as required.
Menu 1 is selected by momentarily pressing and releasing the MENU 1/Menu 2 button.
Menu 2 is selected by holding down the MENU 1/Menu 2 button for at least two seconds.
3.Once the first menu category is displayed, further presses of the MENU 1/Menu 2 button move on to the next category.
4.To enter a category and display an item, press the ENTER button. The display will show the item in the top line and the current parameter in the bottom line.
5.The current active parameter is indicated with an asterisk*.
To alter the parameter, press the 
buttons. To make a new parameter active, press the ENTER button when that parameter is displayed.
6.To move on to a new item or category, press the MENU 1/ Menu 2 button. To exit the menu, press the ON LINE button.
The following tables list printer menu selections. Factory default settings are indicated in bold type.
English
User’s Guide | 9 |