2.Remove the new image drum from the package.
3.Remove the protective paper.
5.Remove the shipping insert from the toner well and discard. Reset the drum counter (see below), and install a new toner cartridge following the instructions in the previous section.
4.Install the new image drum cartridge into the printer placing the alignment pins on each end into the slots in the printer.
Resetting the Drum Counter
After replacing the image drum cartridge, reset the drum counter to keep a correct count of the number of pages printed on the image drum.
1.Turn the printer on while holding the MENU 1/Menu 2 button. USERMNT displays in the control panel window.
2.Press MENU 1/Menu 2 three times. DRUM CNT RESET displays.
3.Press ENTER. The counter will reset and the printer will go
20 | OKIPAGE 10ex, 12i/n |