REMOTE BASS CONTROL MODULE (QS1500D)
Before connecting the remote, it will be necessary to find a mounting location that will be easy to access for adjustment. Once you select your mounting location, you will need to run the control wire from the remote to the amplifier. To avoid possibility of induced noise from the car's electrical system (i.e. popping noises or engine noise), run the cable from the remote to the amplifier away from the car's electrical wiring.
BASS | SUB | LOW | LEVEL | OUTPUT INPUT | ||
BOOST | SONIC | PASS |
| |||
|
| L | ||||
POWER |
|
|
|
|
| |
PROTECT |
|
|
|
|
|
|
0dB 12dB | 15Hz | 55Hz | 40Hz 150Hz | 5v | 0.2v | R |
Subsonic Filter - On the QS1500D a subsonic filter has been provided to filter out unwanted subsonic bass frequencies below the audible range of the subwoofer . This feature helps to improve the amplifiers overall performance since power
is not wasted reproducing frequencies beyond the speakers operating range. This feature works in conjunction with the
15