Epson SRP-275 user manual Customize value Function Selectable value

Page 19

SRP-275

• Memory Switch 8

Switch

Function

1Upside down

2Font Selection

3Selection Paper End Buzzer

4Reserved

5Selection of the cover open status

6Buffer Size

7Receive buffer full release

8Printer (Cover open during operation)

NOTES

On

Off

On

Off

Font B

Font A

Off

On

Fixed

to Off

Cover open

Paper end

40 bytes

8 Kbytes

Remaining 522 bytes

Remaining 640 bytes

Errors that can

Errors that

possibly recover

automatically recover

MSW 8-5:

When Off is selected, a bit of the “paper end sensor” in each status that is transmitted from the printer is changed every time the rear cover is open or closed. When On is selected, a bit of the “rear cover open / close" in each status that is transmitted from the printer is changed every time the rear cover is open or closed. When you replace a SRP-270 with a SRP-275, you should adjust the MSW 8-5 to Off.

MSW 8-8:

When Off is selected, a bit of the “automatic recoverable error” in each status that is transmitted from the printer is changed every time the rear cover is open. When On is selected, a bit of the “mechanical error” in each status that is transmitted from the printer is changed every time the rear cover is open.

The setting of MSW 8-5 and 8-8 can be set by “Memory Switch setup mode”.

• Customize value

Function

Selectable value

Paper roll width

57.5 mm / 69.5 mm / 76 mm (default value)

NOTES

These setting can be set by “Memory Switch setup mode.”

• Serial communication

Function

Selectable value

baud rate

2400 bps

4800 bps

9600 bps

19200 bps

 

Parity

None

Odd

Even

-

 

Handshake

DSR/DTR

XON/XOFF

Data length

7 bit

8 bit

NOTES

There are two methods, DIP Switch and Memory Switch, to adjust the serial communication conditions. DIP Switch 1-5 selects which is effective, DIP Switch or Memory Switch.

To enable the “Serial communication“ setting, you have to adjust the “Serial interface selection“ function of DIP Switch 1-5 to “Memory Switch”.

These settings can be set by “Memory Switch setup mode”.

Rev. 1.03

- 19 -

Page 18 Page 20
Image 19
Page 18 Page 20
Contents SRP-275 Do not plug several products in one multi-outlet SRP-275 Safety PrecautionsTo Unplug SRP-275SRP-275 Label Material SRP-275 EMC and Safety standards AppliedCE Marking Waste Electrical and Electric Equipment WeeeFront view SRP-275 IntroductionRear view SRP-275 Table of Contents Unpacking SRP-275 Setting Up the PrinterChoosing a place for the printer Paper OUT LED Red Color Using the operation panelControl panel Power LED Green Color Error LED Red ColorConnect the AC adapter according to the following procedure SRP-275 Connecting the cablesConnecting the AC Adaptor Connecting the Interface cable and Drawer kick-out cableDrawer kick-out Interface connectorConnector Serial Interface RS-232CParallel Interface IEEE1284 Pin no Source Compatibility mode Nibble mode Byte modePin No Description Direction USB InterfaceEthernet Interface Drawer kick-outSetting the DIP Switch SRP-275 Setting the SwitchesDIP Switch setting for EpsonESC/POS mode International Character Selection DSW Code Country DIP Switch setting for CitizeniDP 3550 modeEmulation Selection DSW 1-1 DIP Switch setting for StarSP500 modeChanging the DIP Switch setting Off Setting the Memory SwitchesMemory Switch setting for EpsonESC/POS mode Memory Switch FunctionSerial communication Function Selectable value Customize value Function Selectable valueExample of Memory Switch setup sheet Memory Switch Setup ModeProcedure of Memory Switch setting Settings Memory Switch setting for Star modeFunction Class Default Settings Dbcs Function Memory Switch BitMSW 2-A Memory Switch Bit FunctionCharacter Table *2 Memory Switch Bit Function Reserved SRP-275 Ribbon Cassette Installation SRP-275 Roll Paper Installation SRP-275 Changing the paper width SRP-275 Installing the wall mount Option SRP-275 Self Test SRP-275 Hexadecimal Dumping To use the hexadecimal dump feature, follow these stepsHexadecimal dump Ribbon cassette specification SpecificationPrinting specification Paper specificationsReliability Electrical characteristicsEnvironment conditions Weight Dimensions & weightOptional features DimensionsError Description Error LED blinking pattern Recovery SRP-275 Appendix TroubleshootingError LED blinking pattern Recoverable errorsIf any of the lights are on, please check the following Printer does not start printingSelf test Printer stops printingYou want to check the operation of the printer by itself Printing is poor

SRP-275 specifications

The Epson SRP-275 is a versatile and reliable impact printer designed primarily for point-of-sale (POS) applications. Known for its robustness and efficiency, this printer is ideal for retail environments, restaurants, and other service-oriented businesses where quick and durable printing is essential.

One of the key features of the SRP-275 is its ability to produce high-quality receipts and documents at a speed of up to 350 mm per second. This rapid printing capability ensures that customers experience minimal wait times, enhancing overall service efficiency. Additionally, the printer supports a wide range of paper types and widths, accommodating various receipt sizes while maintaining crisp and clear text quality.

In terms of connectivity, the Epson SRP-275 offers multiple options, including parallel, USB, and serial interfaces, allowing for seamless integration with existing POS systems. This flexibility ensures that businesses can implement the printer without the need for major system overhauls or expensive upgrades.

The SRP-275 utilizes Epson's advanced thermal printing technology to reduce wear and tear on both the printer and the print media. The printer’s robust design also includes a built-in power supply which results in minimal setup requirements and decreases the clutter often associated with external power adapters. With its heavy-duty construction, the SRP-275 is capable of enduring demanding environments, making it a reliable choice for high-volume printing tasks.

Another noteworthy characteristic of the Epson SRP-275 is its user-friendly design, which simplifies maintenance and operation. The printer is equipped with an easy-to-load paper mechanism, requiring minimal time and effort for paper changes. Furthermore, it features an LCD display that provides real-time status information, helping users identify potential issues quickly.

In conclusion, the Epson SRP-275 is a robust, efficient, and feature-rich impact printer that excels in various commercial applications. With its high-speed printing, versatile connectivity options, and durable construction, it is an excellent investment for businesses seeking reliable and high-quality printing solutions. Whether in a bustling retail store or a busy restaurant setting, the SRP-275 delivers consistent performance, helping organizations enhance service delivery and streamline operations.
Top Page Image Contents