SRP-275
6. Changing the paper width
Screw(3x6)(2pieces)
Frame paper control
57.5mm 69.5mm 76mm(default)
1)Open the rear cover.
2)Remove the frame paper control by loosing the two screws(3×6).
3)Reattach the frame paper control in you want. (Insert and tighten two screws(3×6) to reattach.)
4)Close the rear cover.
5)Change the Memory Switch setting for changing paper roll width. (See the instructions "Setting the Memory Switches"(3.1) in Chapter 3.)
Rev. 1.03 | - 30 - |