Operation
6.Start your music player from your mobile phone.
7.If your phone supports AVRCP, the main speaker button is able to control Play/Pause/Next Previous Song.
8.If your phone supports A2DP, the speaker will produce a stereo sound effect.
9.You can adjust the speaker volume with the Bluetooth Mobile Phone supporting
AVRCP.
Remark:
Speaker will remain in pairing mode for 1 minute. If the pairing fails, please turn off the device and restart steps 1 - 5. For detailed information of your mobile phone A2DP & AVCRP function, please refer to your mobile phone user guide.
To finish music
1.To turn off speaker, press and hold the speaker pairing button for 3 seconds.
2.To turn off Bluetooth AV Dongle, press and hold the Dongle pairing button for 3 seconds.
3.Leave your mobile phone in Bluetooth mode.
Precautions
About The Bluetooth Speaker System
1.Do not open the speaker. Refer repair service to qualified personnel only.
2.If you need to open the battery compartment while the speaker is wet, please use a dry towel to dry the speaker to keep water out of the battery compartment.
If you accidently wet the battery compartment, please use a dry towel to dry out the battery compartment and let sit at room temperature for few hours before installing a new battery.
Turn
Turn clockwise to close the battery door
Auto Connection
3.Since this speaker is waterproof, make sure the battery door is closed very tight to prevent water from entering.
4.Please do not put anything into the hole.
About Vent Hole
The vent hole exists to stabilize speaker sound quality. Please do not put anything into the hole. If water should go into the hole, do not worry
not affect the speaker quality. However, it would be best to leave the speaker upside down for awhile to let the water drain out when you are not using the speaker.
9
About Bluetooth Communication
Bluetooth technology operates within a range of about 33 feet. In fact, it may be less if there are obstacles (people, metal, walls, etc) or an electromagnetic environment.
The following conditions may affect the sensitivity of Bluetooth communication: *There is an obstacle, such as a person, metal or wall between
*A device using 2.4GHz frequency, such as a wireless LAN device, cordless telephone, or microwave oven, is in use near
10