Operation
Using By Connecting with Bluetooth AV Dongle
1. Press & Hold the Speaker Pairing Button | for 8 Seconds until LED alternately |
Flashes Red & Blue |
|
2. Press & Hold the Dongle (Base) Pairing button | for 8 seconds until LED |
alternately Flashes Red & Blue |
|
3.After steps 1 & 2 are completed - wait 3 - 5 seconds - LEDs on Speaker & Base will Flash Blue to Confirm Pairing
4.Plug the 3.5mm Phone Jack on the Base into the Headphone Jack on your Audio Device, then Press PLAY
Remark:
Initial Set Up should only required for first time use. If you change devices - then you will need to repeat steps 1 – 3
Dongle & Speaker will exist the pairing mode after 1 minute if the pairing fails. To return the pairing mode, turn off the device and restart step 1 - 2).Passcode of this speaker is fixed to “0000”.It can not be paired with a bluetooth source device whose passcode is not “0000”.
7
Operation
Using By Connecting with Bluetooth Mobile phone
1. Press & Hold the Speaker Pairing Button for 8 seconds until the LED flashes red & blue.
Red & Blue
LED flash
2. Turn on bluetooth mode of Mobile phone and enter "Search Bluetooth device" mode.
3. Mobile phone will find a device name
Bluetooth Device: | ||
| 00 00 | |
Selection Cancel | OK | Cancel |
Remark: For other bluetooth source devices, passcode may be called”8888,” ”pass,” etc.
4. Mobile phone will ask "Authorize Auto Connect." Select YES.
Authorize Connect:
YES NO
5.After pairing is successful, the Speaker LED will flash blue.
8