Sony DPP--SV77 Precautions, On safety, On installation, On moisture condensation, 85 GB

Additional information

Precautions

On safety

•Operate the printer on 120 V AC, 60 Hz (for the 110 to 120V area) or 220 to 240 V AC, 50/60 Hz (for the models for other areas) only.

•Be careful not to set or drop any heavy objects on the power cord, or to damage the power cord in any way. Never operate this printer with a damaged power cord.

•Should any solid object or liquid fall into the cabinet, unplug the printer and have it checked by qualified personnel before operating it any further.

•Never disassemble the printer.

•To disconnect the power cord, pull it out by the plug. Never pull the power cord itself.

•When the printer is not going to be used for an extended period of time, disconnect the power cord from the wall outlet.

•Do not handle the printer roughly.

•To reduce the risk of electrical shock, always unplug the printer from the electrical outlet before cleaning and servicing the printer.

•Take care not to scratch or damage your printer’s LCD screen. Always use the supplied stylus or a plastic- tipped pointer to tap on the screen. Do not use a real pen, pencil, or other sharp object on the screen.

•Your printer’s screen is made of glass. Do not drop or submit your printer to external shock.

On installation

•Avoid placing the printer in a location subject to:

–vibration

–high humidity

–excessive dust

–direct sunlight

–extremely high or low temperatures

•Do not use electrical equipment near the printer. The printer will not work properly in electromagnetic fields.

•The printer is designed to operate horizontally. Never attempt to operate the printer in a tilted position.

•Do not place heavy objects on the printer.

•Leave enough room around the printer so that the ventilation holes are not blocked. Blocking these holes may cause internal heat build-up.

On moisture condensation

If the printer is brought directly from a cold location to a warm location or placed in an extremely warm or humid room, moisture may condense inside the unit. In such cases the printer will probably not work properly and may even develop a fault if you persist in using it. If moisture condensation occurs, turn off the power and do not use the printer for at least one hour.

Additional information

85 GB