WARNING Electrical Shock or Personal Injury Hazard
Disconnect the electrical supply before servicing or cleaning the unit. Failure to do so could result in electrical shock or personal injury from cleaner suddenly starting.
Removing and Installing Lower Plate
Two Latches
Dos pestillos
Deux taquets 
Lower Plate
Base inferior
Plaque inférieure
Two Locking Tabs
Dos lengüetas de cierre Deux loquets de sûreté
➢Before servicing any parts, disconnect vacuum from electrical outlet.
➢Always place paper under nozzle whenever lower plate is removed to protect floor.
➢Place handle in upright position and turn vacuum over to expose lower plate.
➢Release lower plate by pressing two
(2) latches and two (2) locking tabs inward as shown.
➢Remove lower plate and remove any residue that may exist in belt area.
➢Reinstall lower plate by hooking front end of lower plate into slots on front of nozzle housing.
➢Make sure all wires are routed properly and not pinched.
➢Press lower plate until locking tabs snap into place then push the two (2) latches outward.
- 28 -
