Sony DPP--SV77 operating instructions 75 GB

4Click “Yes.”

The relevant files are removed from your computer’s hard disk.

Note on DPP-SV77 software installation for the customers using Sony DPP-SV55 digital photo printer

When you have already installed the Sony DPP-SV55 printer driver or reader software onto your computer with Windows 98/98SE/Me operating system, your computer cannot detect the DPP-SV77 connected via USB port as new hardware. Follow the procedures below to change the DPP-SV55 USB driver into the DPP-SV77 USB driver. Then run “Setup.exe” contained in the CD- ROM supplied with the DPP-SV77 to install the software.

Once you have changed the USB driver, you can connect and use the DPP- SV55 as well as DPP-SV77. The DPP-SV55 is displayed as DPP-SV77 on your computer, which is not problem.

1 Start Windows, turn on the printer and connect the printer with the computer via USB port.

2 Click “Start” from the Windows taskbar, point to “Settings” and then click “Control Panel.”

3 Double-click “System” to open the “System Properties” window.

4 Open the “Device Manager” tab, select “Sony DPP-SV55 USB Digital Photo Printer” under the “Universal serial bus controller” and then click “Properties.”

5 Open the “Driver” tab and click “Update driver.” 6 Click “Next.”

7 Click “Display a list of all the drivers in a specific location, so you can select the driver you want” and then click “Next.”

Printing from your computer

Continued

75 GB