Getting Started

Lexicon

PRODUCT REGISTRATION

Please register the MC-12 Digital Controller within 15 days of purchase. To do so, register online at www.lexicon.com or complete and return the product registration card attached to the back cover of this user guide. The product registration card serves no warranty purposes. Retain the sales receipt as proof of warranty coverage.

INSTALLATION CONSIDERATIONS

The MC-12 requires special care during installation to ensure optimal performance. Pay particular attention to the bulleted items that begin below and to other precautions that appear throughout this user guide.

DO

Install the MC-12 on a solid, flat, level surface such as a table or shelf. The MC-12 can also be installed in a standard 19-inch equipment rack using an optional rack-mount kit available from authorized Lexicon dealers.

Select a dry, well-ventilated location out of direct sunlight.

DO NOT

Expose the MC-12 to high temperatures, humidity, steam, smoke, dampness, or excessive dust. Avoid installing the MC-12 near radiators and other heat-producing appliances.

Install the MC-12 near unshielded TV or FM antennas, cable TV decoders, and other RF-emitting devices that might cause interference.

DO NOT (continued)

Place the MC-12 on a thick rug or carpet or cover the MC-12 with a cloth, as this might prevent proper cooling.

Place the MC-12 on a windowsill or in another location in which it will be exposed to direct sunlight.

Obstruct the front panel IR receiver. When the MC-12 is not using the rear panel IR IN connector, the remote control must be in line-of-sight with the IR receiver for proper operation.

CAUTION Before moving the MC-12, make sure it is powered off with the rear panel power switch. Then, make sure the power cord is

unplugged from the wall outlet.

1-4

Page 16
Image 16
Lexicon Lexicon MC-12 manual Product Registration Installation Considerations, Do not