MODE ADJUST Lexicon
5-12

PANORAMA

• Designed for playback of stereo and matrix-encoded sources.
• Uses proprietary Lexicon algorithms to move the stereo image
outward from the front speakers, producing a wider stereo field
with greater depth.
• Depends on proper location of the primary listening position
and front speakers. When the front speakers are positioned
close to either side of the display device, the effect is produced
over a wider area than when the front speakers are positioned
at a large angle from the display device.
Default Possible
Parameter Setting Settings
EFFECT LVL +4dB -12 to +6dB
BASS CONTENT STEREO BINAURL, MONO, STEREO
LOW FREQ WIDTH +0 -25 to +25
SURR ROLLOFF 3.1kHz 500Hz to 20kHz, OFF
REAR DLY OFFSET 15ms OFF, 1 to 30ms
INPUT BALANCE <|> L< to <|> to >R
CALIBRATION Refer to next column
OUTPUT LEVELS Refer to page 5-32
CUSTOM Refer to page 5-33
Listening mode menu parameter descriptions begin on page 5-34.
PANORAMAMODE ADJUST

CALIBRATION

• Selecting the PANORAMA listening
mode menu CALIBRATION option
opens the PANORAMA CALIBRATION
menu shown at the right, which can
be used to calibrate the PANORAMA
listening mode. This listening mode
must be calibrated to take full
advantage of its effects.
• For best results, it is recommended to center the primary
listening position between the front left and right speakers as
shown in illustration 5-B at the top of the next page (center).
Otherwise, the PANORAMA listening mode will be calibrated
with various results.
• An external calibration source is required to calibrate the
PANORAMA listening mode. It is recommended to select a
familiar stereo source.
Default Possible
Parameter Setting Settings
SOURCE LEFT & RIGHT RIGHT, LEFT & RIGHT, LEFT
SPEAKER ANGLE 30deg 10 to 90deg
LISTENER POS +0 -127 to +127
Listening mode menu parameter descriptions begin on page 5-34.
CALIBRATIONPANORAMAMODE ADJUST
PANORAMA CALIBRATION
SOURCE LEFT & RIGHT
SPEAKER ANGLE 30deg
LISTENER POS +0
NOTE:
ENSURE THAT
“SPEAKER SETUP” HAS
BEEN PERFORMED
PROPERLY