Lexicon Lexicon MC-12 manual Step E Performing Automatic Calibration from, Front Left

SETUP

Lexicon

Step E: Performing Automatic Calibration (continued from page 3-47)

STEP DISTANCES DISTANCES & LEVELS LEVELS

E-5

AUTO DISTANCES

FRONT LEFT	12.0ft
CENTER	10.5ft
FRONT RIGHT	12.0ft
SIDE RIGHT	4.5ft
REAR RIGHT	ERROR
REAR LEFT	6.0ft
SIDE LEFT	4.5ft
MONO SUB	N/A
SUB RIGHT	N/A
LFE	N/A

FRONT LEFT

OK

Refer to the table on page 3-50 for information about all possible speaker calibration messages.

AUTO SPEAKER SETUP

DISTANCESOK

LEVELSERROR

AUTO VALUES APPLIED

PRESS V TO VIEW

DETAILS

When the MC-12 is finished calibrating speaker distances and output levels, the AUTO SPEAKER SETUP results screen shown above will open on the on-screen display,

AUTO LEVELS

FRONT LEFT	-2.0dB
CENTER	ERROR
FRONT RIGHT	-2.0dB
SIDE RIGHT	-4.5dB
REAR RIGHT	-3.0dB
REAR LEFT	-3.0dB
SIDE LEFT	-4.5dB
MONO SUB	N/A
SUB RIGHT	N/A
LFE	N/A

FRONT LEFT

OK

Refer to the table on page 3-50 for information about all possible speaker calibration messages.

When the MC-12 is finished calibrating speaker distances, the AUTO DISTANCES screen shown above will open on the on-screen display, indicating the results for each individual speaker.

•A value indicates that no errors occurred during the calibration procedure.

•An ERROR message indicates that – although a value was calculated – at least one error occurred during the calibration procedure.

• Press the and arrow buttons to highlight the desired speaker calibration parameter. Then, press the arrow button to view more detailed results for the selected speaker. A message similar to the one shown above will open on the on-screen display.

•Refer to the table on page 3-50 for information about all possible speaker calibration messages.

indicating the results for each calibration procedure.

•An OK message indicates that no errors occurred during the calibration procedure.

•An ERROR message indicates that – although a value was calculated – at least one error occurred during the calibration procedure.

•	Press the	and	arrow buttons to
	highlight the desired calibration procedure.
	Then, press the		arrow button to select
	this procedure.

•Selecting DISTANCES opens the AUTO DISTANCES screen shown in the DISTANCES column (left).

•Selecting the LEVELS option opens the AUTO LEVELS screen shown in the LEVELS column (right).

•Refer to the instructions in the appropriate column to view more detailed results for each individual speaker.

When the MC-12 is finished calibrating output levels, the AUTO LEVELS screen shown above will open on the on-screen display, indicating the results for each individual speaker.

•A value indicates that no errors occurred during the calibration procedure.

•An ERROR message indicates that – although a value was calculated – at least one error occurred during the calibration procedure.

• Press the and arrow buttons to highlight the desired speaker calibration parameter. Then, press the arrow button to view more detailed results for the selected speaker. A message similar to the one shown above will open on the on-screen display.

•Refer to the table on page 3-50 for information about all possible speaker calibration messages.

3-48