MODE ADJUST Lexicon
5-26

MUSIC

Designed for playback of 5.1-channel dts music sources.
The MUSIC listening mode is not available unless both
side and rear speakers are present.
Applies ASA processing to signals sent to the rear speakers.
Refer to the ASA parameter description on page 3-31 for more
information.
Recommended for home theaters in which the rear speakers
are placed close together.
Default Possible
Parameter Setting Settings
LFE MIX +0.0dB -10.0 to +0.0dB
OUTPUT LEVELS Refer to page 5-32
CUSTOM Refer to page 5-33
Listening mode menu parameter descriptions begin on page 5-34.
Note:
The MUSIC listening mode can only be
activated with the front panel or remote control
Mode buttons.
@@ @** MUSICMODE ADJUST

&

Listening mode name differs depending on the encoding
present in the input source, the DECODING parameter
setting, and the speaker setup. Refer to page 5-22 for more
information.
Designed for playback of 5.1-channel dts, 5.1-channel matrix-
encoded dts-ES, and 6.1-channel discrete-encoded dts-ES
sources.
Decodes 5.1 matrix or 6.1 discrete channels from dts(-ES)
sources. The six main channels are full frequency. The .1
channel, often referred to as LFE information, has a limited
frequency range of 120Hz.
Appropriate for 5.1-channel dts, 5.1-channel matrix-encoded
dts-ES, and 6.1-channel discrete-encoded dts-ES sources.
Default Possible
Parameter Setting Settings
LFE MIX +0.0dB -10.0 to +0.0dB
DECODING AUTO AUTO, ON, OFF
OUTPUT LEVELS Refer to page 5-32
CUSTOM Refer to page 5-33
Listening mode menu parameter descriptions begin on page 5-34.
@@@*MODE ADJUST