Lexicon Lexicon MC-12 manual Auto Speaker Setup results screen shown above

MC-12

SETUP

STEP DISTANCES DISTANCES & LEVELS LEVELS

E-6

SET DISTANCES

AUTO DISTANCES ORIGINAL DISTANCES

		R	SR	RR
		0.0ft	0.0ft	0.0ft
		C
		0.0ft
	M	L	SL	RL
	SUB
0.0ft		0.0ft	0.0ft	0.0ft

AUTO DISTANCES

FRONT LEFT	12.0ft
CENTER	10.5ft
FRONT RIGHT	12.0ft
SIDE RIGHT	4.5ft
REAR RIGHT	ERROR
REAR LEFT	6.0ft
SIDE LEFT	4.5ft
MONO SUB	N/A
SUB RIGHT	N/A
LFE	N/A

AUTO SPEAKER SETUP

DISTANCESOK

LEVELSERROR

AUTO VALUES APPLIED

PRESS V TO VIEW

DETAILS

AUTO DISTANCES*

FRONT LEFT	12.0ft
CENTER	10.5ft
FRONT RIGHT	12.0ft
SIDE RIGHT	4.5ft
REAR RIGHT	ERROR
REAR LEFT	6.0ft
SIDE LEFT	4.5ft
MONO SUB	N/A
SUB RIGHT	N/A
LFE	N/A

SET LEVELS

AUTO LEVELS

ORIGINAL LEVELS

		R	SR	RR
		0.0dB	0.0dB	0.0dB
		C
		0.0dB
	M	L	SL	RL
	SUB
0.0dB		0.0dB	0.0dB	0.0dB

AUTO LEVELS

FRONT LEFT	-2.0dB
CENTER	ERROR
FRONT RIGHT	-2.0dB
SIDE RIGHT	-4.5dB
REAR RIGHT	-3.0dB
REAR LEFT	-3.0dB
SIDE LEFT	-4.5dB
MONO SUB	N/A
SUB RIGHT	N/A
LFE	N/A

Press the arrow button to return to the

Press the arrow button to open the SET DISTANCES screen shown above, which can be used to select the desired speaker distances.

•	Press the	and arrow buttons to toggle
	between	calibrated	speaker	distances
	(AUTO) and original speaker distances. The
	speaker graphics at the bottom of the
	on-screen display will update to indicate
	the selected values.
•	Press the	arrow	button to	apply the

selected values. A confirmation message will appear on the on-screen display, indicating that the selected values have been applied.

•When the desired values have been applied,

press the arrow button twice in succession to return to the SPEAKER SETUP menu.

AUTO SPEAKER SETUP results screen shown above.

•If desired, follow the instructions in step E-5 to select the other calibration procedure.

Otherwise, press the the arrow button to return to the SPEAKER SETUP menu.

*The AUTO DISTANCES screen is shown above as an example. The AUTO LEVELS screen can be substituted.

Press the arrow button to open the SET LEVELS screen shown above, which can be used to select the desired speaker output levels.

•	Press the	and arrow buttons to toggle
	between calibrated output levels (AUTO)
	and original output levels. The speaker
	graphics at the bottom of the on-screen
	display will update to indicate the selected
	values.
•	Press the	arrow button to apply the

selected values. A confirmation message will appear on the on-screen display, indicating that the selected values have been applied.

•When the desired values have been applied,

press the arrow button twice in succession to return to the SPEAKER SETUP menu.

Note:	If desired, refer to the MANUAL CALIBRATION section that begins on page 3-51 to fine-tune individual speaker distances and output levels. It is recommended to
	configure BASS PEAK LIMITERS menu parameter settings (page 3-56).

. . . Step E: Performing Automatic Calibration continues on page 3-50

3-49