Lexicon Lexicon MC-12 Main Zone Input Selection Buttons, Main Zone Off Button, Zone 2 Off Button

ZONE2 VOLUME -34dB

RECORD VOLUME -34dB

MC-12

Basic Operation

To use the volume knob to adjust Zone 2 or Record Zone volume level:

1.Press and hold the front panel Zone 2 or Record Zone input selection button that corresponds with the current input source. For instance, if the current input source is using the DVD1 input, press and hold the DVD1 input selection button.

2. While holding the selected Zone 2 or

Record Zone input selection button, rotate the volume knob clockwise to

increase or counterclockwise to decrease

volume level in 1dB increments. The corresponding horizontal graph shown

here appears on the on-screen and front panel displays. These graphs illustrate the position at which the current Zone 2 or Record Zone volume level falls within the –80 to +12dB volume range.

3.Release the selected Zone 2 or Record Zone input selection button when Zone 2 or Record Zone volume level has been set.

Note:

Remote control input selection buttons cannot be used to select Zone 2 or Record Zone volume level adjustment, even if the Zone 2 or Record Zone command bank is activated.

7. Main Zone Input Selection Buttons

Selects the input in the Main Zone. When an input is selected, a blue LED lights on the corresponding input selection button. When the Main Zone is deactivated, pressing a Main Zone input selection button activates the Main Zone and selects the

corresponding input. Zone 2 and the Record Zone remain deactivated until a Zone 2 or Record Zone input is selected.

8. Main Zone Off Button

Deactivates the Main Zone.

9. Zone 2 Input Selection Buttons

Selects the input in Zone 2. When an input is selected, an amber LED lights on the corresponding input selection button. When Zone 2 is deactivated, pressing a Zone 2 input selection button activates Zone 2 and selects the corresponding input. The Main and Record Zones remain deactivated until a Main or Record Zone input is selected.

10.Zone 2 Off Button

Deactivates Zone 2.

11.Record Zone Input Selection Buttons

Selects the input in the Record Zone. When an input is selected, a red LED lights on the corresponding input selection button. When the Record Zone is deactivated, pressing a Record Zone input selection button activates the Record Zone and selects the corresponding input. The Main Zone and Zone 2 remain deactivated until a Main Zone or Zone 2 input is selected.

12.Record Zone Off Button

Deactivates the Record Zone.

2-5