Lexicon Lexicon MC-12 manual Remote only, Lock Options, Trigger Setup from

SETUP

Lexicon

Trigger Setup (continued from page 3-65)

REMOTE ONLY ON, OFF

SETUP TRIGGERS TRIGGER 1 OR TRIGGER 2 REMOTE ONLY

Configures the selected trigger output connector for remote operation. Select the ON setting to configure the selected connector for remote operation. Select the OFF setting to configure the selected connector for program operation. Refer to the Program Operation Parameter description below for more information.

When configured for remote operation, the connector labeled 1 can be activated and deactivated with the MODE + and – buttons when the Zone 2 command bank is activated, and the connector labeled 2 can be activated and deactivated with the MODE + and – buttons when the Record Zone command bank is activated.

Note:

When the REMOTE ONLY parameter is set to ON, all TRIGGER SETUP menu program operation parameter settings are ignored.

Program Operation Parameters	ON, OFF
SETUP TRIGGERS TRIGGER 1 OR TRIGGER 2	Program Operation Parameter

Configure the selected trigger output connector for program operation when the REMOTE ONLY parameter is set to OFF. Select the ON setting to associate the selected connector with the corresponding input(s) or listening mode.

When configured for program operation, the connector activates when the associated inputs or listening modes are activated and deactivates when the associated inputs or listening modes are deactivated.

Note the following:

•Connectors can be associated with individual Main Zone inputs and listening modes, as well as the Zone 2 and Record Zone inputs.

•Connectors cannot be associated with individual Zone 2 and Record Zone inputs.

•Connectors can be associated with multiple inputs and listening modes at the same time.

Note:

When the CUSTOM menu RESET MODE option is selected to restore the factory-default version of the selected listening mode, the corresponding TRIGGER SETUP menu program operation parameter is automatically set to OFF.

LOCK OPTIONS

SETUP LOCK OPTIONS

Selecting the SETUP menu LOCK OPTIONS option opens the LOCK OPTIONS menu shown on the next page, which can be used to protect MODE ADJUST, AUDIO CONTROLS, and SETUP menu branch parameter settings from accidental changes.

3-66