Introduction
yMultichannel Firewire (IEEE 1394a) input and output
– routes each individual channel’s output, plus the MAIN outputs, through the FIREWIRE port, and receives two channels back from the computer, all in
yASIO and WDM computer drivers – lets you use the MultiMix FireWire with the vast majority of digital audio workstation programs.
yClean and powerful preamps – up to 50dB of preamp gain for capturing quiet sources. Globally switched phantom power.
yStereo inputs – Two stereo pairs for the MultiMix 8 FireWire. Four stereo pairs for the 12- and
yInternal digital effects processor with 100 preset effects and an
y
y2 aux sends per channel – one can be used to access an external effects device; the other can be used either to access the MultiMix’s internal effects or to access a second external device. On the
yControl room output level – provides control over the separate control room output.
y
Additional Features of the MultiMix 12
FireWire and MultiMix 16 FireWire
yPFL/Solo in place functionality per channel – isolates a channel with a single push of a button.
yMute/Alt 3/4 assign per channel – lets you mute a channel and, at the same time, route its signal to the mixer’s ALT 3/4
yIndependent Main Mix and Alt 3/4 levels – permits you to separately command the levels of the MultiMix’s two stereo buses
yS/PDIF digital out – sends the
7