5 Firewire Recording
Using the MultiMix FireWire with
CoreAudio on the Macintosh
Mac users can impress their friends with the following instructions for using the MultiMix with CoreAudio:
1.Open the Mac’s “Audio MIDI Setup” utility.
2.Choose the MultiMix FireWire as both input and output device.
3.Choose the MultiMix as the default input and output.
4.Under System Preferences, choose “MultiMix FireWire.” Adjust the device nickname, buffers, clock source, sample rate, etc. as needed. For additional information on these settings, see the discussion of the ASIO control panel on page 40.
46
Mac OS X 10.3 or higher is required by the MultiMix drivers.