Alesis 12 FireWire, 16 FireWire, 12, 16 manual Traditional Mixing, Simple Live Setup

4Traditional Mixing

Simple Live Setup

Connect your instruments and microphones to the mono and stereo channels, making sure to properly set the level of each channel.

You can select one on-board effect and control its level with the AUX B knob for each channel. You can also use an external effects processor by sending a signal to the external unit via the AUX SEND A and returning it via AUX RETURN A (you’ll probably want to set AUX SEND A to POST, for “post-fader.”).

If you wish, you can use a second external effects processor via AUX SEND B and AUX RETURN B. However, note that use of an external effects processor on these jacks disables the internal effects.

Connect the MAIN MIX OUT to a PA system amplifier. For monitoring purposes, you can connect the CTRL RM OUT to a headphone amplifier. You could also connect a digital equalizer (like the Alesis DEQ-230D) between the DIGITAL OUTPUT and a PA system for extra tone control.

By muting channels and pressing the ALT 3/4-to-HDPH/CTRL RM button in, you can audition a channel before you bring it into the mix, making sure the levels are OK before the audience hears it.

Using Additional External Audio

Sources

The MultiMix gives you a few extra audio inputs in addition to the mic and line inputs. If you want to bring external audio sources into a recording or live mix, you can do it in one of two ways:

Using the 2-TRACK IN, you can add a tape deck, ADAT, CD player, Firewire audio stream from a computer, or other source to the mix. The 2-TRACK IN also can be used to entertain the audience with a CD as the band is setting up for a live show.

The AUX RETURNS can be used as additional audio inputs when you are not using them for effects.

S/PDIF digital output to a digital recorder

Connect the S/PDIF DIGITAL OUTPUT of your MultiMix console to the DIGITAL IN on your external digital recorder (12-channel and 16-channel models only).

Audio coming into the MultiMix from a computer over the Firewire connection is routed to the 2-TRACK IN.

You can use the RCA jacks of the 2-TRACK IN at the same time as audio is playing back from a computer, but you must adjust the relative levels of each input from outside the MultiMix.

The S/DPIF output operates at 24 bits. This is compatible with devices like CD recorders that operate at 16 bits: the least significant bits are simply ignored by the 16- bit device.

23