Tools of the Trade

Power for systems with a single amplifier can be supplied by most automotive electrical sys- tems. Systems with multiple amplifiers may require a higher capacity battery, alternator or the use of a storage capacitor. We strongly recommend the use of a Directed Audio Essentials power capacitor with an extra battery in larger stereo systems.

Orion amplifiers generate a certain amount of heat as part of normal operation. Be sure the area around the amplifier is unobstructed to allow adequate air circulation. Remember, beach blankets, last week's laundry, school books and homework papers located on top of the amplifier do not improve air flow and may become damaged.

Listed below are the majority of the tools required to perform an installation. Having the proper tools will make the installation that much easier. Some of these tools are necessities; some will just make the job easier.

●Allen Wrenches (2.5mm and 3mm)

●DMM or VOM

●Electric drill with assorted drill bits

●Grommets

●Heat shrink tubing

●Marking pen

●Nylon tie straps

●Phillips and flat blade screw drivers

●Pliers (standard and needle nose)

●Reference CD with 1 kHz Sine Wave at 0dB level (all bits high)

●RTA (real time analyzer)

●Soldering iron and solder

●Utility knife

●Wire brush or sandpaper for chassis grounding

●Wire crimper

●Wire cutters

●Wire strippers

Step By Step Installation

Step 1 Determine the location for the amplifier. Refer to the Choosing Mounting Locations section of this guide for detailed information.

Step 2 Decide on the system configuration for your amplifier. For system sugges- tions, refer to the Speaker Connections section of this guide.

Step 3 Run all the wires from the amplifier location to the speakers, source unit, and battery. Do not connect the battery at this time. Be sure to run RCAs and power and speaker wires away from factory electrical wires and system as they pose a great potential for induced system noise.

Step 4 Pre-drill amplifier mounting holes. Be sure to "think before you drill". Gas tanks, fuel lines, and other obstructions have a nasty way of hiding them- selves. For best results use a marking pen to mark the mounting holes and pre-drill these holes with a standard 1/8" drill bit.

Step 5 Mount the amplifier. Make sure the amplifier is mounted on a flat surface. If this is not possible, do not over tighten the screws so that the chassis of the amplifier is twisted or bent.

7005 specifications

Orion Car Audio 7005 is an impressive amplifier designed to enhance the sound quality and overall audio experience in your vehicle. Known for its durability and innovative technologies, the 7005 model exemplifies why Orion is a trusted name in car audio systems.

One of the standout features of the Orion 7005 is its powerful output capability. With a peak power rating of 700 watts and RMS output at a stable 2 ohms, this amplifier provides the muscle needed to drive high-performance speakers with ease. This ensures that users enjoy clear, dynamic sound even at high volumes, making it an excellent choice for bass enthusiasts and audiophiles alike.

The compact design of the Orion 7005 allows for flexible installation options, fitting neatly into various vehicle spaces without compromising performance. Its heat sinks are efficiently designed to manage heat, promoting longevity and reliable performance even during extended use. This is essential for maintaining optimal sound quality and performance under demanding conditions.

In terms of technology, the Orion Car Audio 7005 features advanced circuitry that includes built-in low and high pass filters. These filters ensure that the signal sent to the speakers is perfectly matched to their frequency range, enhancing the clarity and depth of sound. Additionally, the adjustable gain control allows users to fine-tune the audio output according to their preferences, providing greater control over their listening experience.

The amplifier also supports a variety of input options, including RCA inputs for high-level connections, making it compatible with a vast array of head units and source units. This versatility enables users to integrate the Orion 7005 easily into existing audio systems.

Another significant attribute of the Orion 7005 is its robust protection circuitry, which safeguards the amplifier from shorts, overheating, and other potential hazards. This feature not only protects the amplifier itself but also ensures the safety of the connected speakers, delivering peace of mind alongside exceptional audio performance.

Overall, the Orion Car Audio 7005 proves to be an outstanding investment for car audio enthusiasts. With its powerful output, versatile connectivity, and advanced protective features, it stands out in the realm of car audio amplifiers, promising an immersive and enjoyable sound experience on every journey. Whether you're an audio novice or a seasoned expert, the Orion 7005 offers something for everyone.