Epson TM200 Main Circuit Board Unit, Autocutter Module, Autocutter operation, Cutter blade knob

Page 23

TM200 Service Manual

Autocutter Module

This printer is equipped with an autocutter module for cutting of the roll paper and a manual cutter for manual cutting.

The autocutter has two opposing cutter blades that operate like a scissors to cut the paper. It is a separate cutter blade-type mechanism that does not require passage of the roll paper through an autocutter mechanism slit. Opening the frame cover causes the stationary blade to separate completely from the moving blade. The stationary blade is fixed to the frame cover, while the moving blade is attached to the main frame.

Autocutter operation

The frame cover can be closed while the movable blade is in the home position. Closing the frame cover causes the stationary blade to come into partial contact with the paper cutter frame, and the stationary blade and movable blade are brought into relative position.

Cutter blade knob

The movable blade is in the home position whenever cutter operation is not being performed. In addition to safety considerations, this enables a mechanism in which the frame cover cannot be opened or closed while the movable blade is not in the home position.

2.3 Main Circuit Board Unit

The main circuit board unit is made up of the following electrical circuits:

‰CPU and CPU peripheral logic circuits

CPU RAM ROM Gate array Reset circuit

‰TM200 control circuits

Thermal head drive circuit

Paper feed motor drive circuit

Autocutter drive circuit

Detector circuits

‰Control panel control circuits

‰Drawer kick control circuit

‰Power supply circuits

‰Filter circuits

+24V output circuit

+5V output circuit

- 21 -

Image 23
Contents TM200 Appendix a Printer cover Control Panel Cutter cover Cover open button Printer PartsCharacter size Printing SpecificationsPrintable Area Paper SpecificationsElectrical Specifications AutocutterConditions of acceptability EMI and Safety Standards AppliedExternal Dimensions and Weight ReliabilityHumidity Environmental ConditionsTM200 Printer Mechanism Major Component SpecificationsConnectors Power Supply ConnectorRS-232 serial interface Drawer Kick-out ConnectorInterfaces TM200 serial printer status and signals Switching between online and offlinePanel Button Buttons, Switches, and Panel LightsPower Switch Type Rocker switch FunctionSerial interface model DIP SwitchesPanel lights OFF Transmission Speed EPP Parallel interface model DIP switchRunning the self test Self-testEnding hexadecimal dumping Hexadecimal DumpHexadecimal Dump Function Performing a Hexadecimal DumpCover Open Sensor Standard AccessoriesPaper Sensors Cover Open ButtonConsumables External Power Supply SpecificationsInput specifications OptionsOutput specifications TM200 Printer Mechanism Component ConnectionsFrame cover open Printer Mechanism Thermal head ModuleCutter blade knob Main Circuit Board UnitAutocutter Module Autocutter operationTM200 Control Circuit CPU peripheral logic circuitsDrawer Kick Control Circuit Power Supply CircuitControl Panel Control Circuit I/F Circuit Board Switch Circuit BoardHandling Transport PrecautionsSetup Precautions Operational PrecautionsLoading paper roll Paper PrecautionsPage Errors Problem SolvingClearing Paper Jams Cleaning Thermal head Inspection and MaintenanceMaintenance Procedures Dirt, lint, dust Platen roller on receipt sidePaper roll end sensor on receipt side Exterior dirtSymptoms and Solutions TroubleshootingData Receive Error only with the serial interface model Error Types and ProcessingPrinter Operation when an Error Occurs Page Titles Before Starting disassembly, assembly, and adjustmentUsing this Manual Disassembly, Assembly, and Adjustment ProceduresPlease following the steps for disassembly TM200 Disassembly, Assembly, and AdjustmentDoor sensor block Page Paper out sensor block and paper sensor block Page Page Autocutter module Page Thermal head module Page Page Main circuit board Page Page Switching between online and offline SpecificationsInterface Pin Assignments Appendix B Exploded diagram Appendix C Panel lights and indicators Page Appendix D Parts number list

TM200 specifications

The Epson TM200 series represents a significant advancement in the realm of receipt printers, catering to a diverse range of business needs. Known for its reliability, speed, and compact design, the TM200 is engineered specifically to meet the demands of retail, hospitality, and other environments requiring efficient transaction processing.

One of the standout features of the Epson TM200 is its enhanced printing speed, capable of producing receipts at an impressive rate of up to 200 mm per second. This rapid output reduces the time customers spend waiting for their transactions to be completed, thereby increasing throughput during peak business hours. The device employs advanced thermal printing technology, which not only ensures high-quality output but also minimizes the need for ink or toner.

The TM200 series is designed with versatility in mind. It supports multiple connectivity options, including USB, serial, and Ethernet interfaces, allowing for seamless integration into existing systems. Additionally, its compatibility with various operating systems enhances its usability across a wide spectrum of platforms, making it a flexible choice for businesses.

Another notable characteristic of the TM200 is its compact footprint. The printer's design maximizes counter space, making it an ideal solution for environments with limited room. Despite its small size, the TM200 does not compromise on performance, delivering robust features in a sleek form factor.

Built with durability in mind, the Epson TM200 boasts an extended lifespan, significantly reducing the need for frequent replacements. Its intuitive paper load mechanism ensures quick and easy paper changes, further enhancing operational efficiency.

Moreover, the TM200 series utilizes Epson's unique Economode technology, which optimizes power consumption without compromising on performance. This eco-friendly approach not only lowers operational costs but also aligns with sustainability goals pursued by many modern businesses.

In summary, the Epson TM200 series combines high-speed performance, versatile connectivity, compact design, and durability, making it an ideal choice for businesses seeking reliable and efficient receipt printing solutions. Whether placed in a retail store, restaurant, or other commercial environments, the TM200 stands out as a formidable option that meets contemporary business needs with ease and efficiency.