Epson TM200 service manual

Page 48

TM200 Service Manual

CAUTION:

Note that the (thermal head) becomes very hot during normal operation, creating the danger of burn injury. Be sure to wait for about 10 minutes after turning printer power off before beginning the procedures.

When performing procedures, be sure to use a grounded wrist band or take other measures to protect against electrostatic charge. Failure to do so can result in damage to the (thermal head).

Never touch the thermal element (the area that looks like it is marked with a thin black line) of the (thermal head) with your hand. Doing so can damage the heating element.

Whenever there is dirt or any other foreign matter on the (thermal head), clean it off with a cotton swab moistened with alcohol.

When you installed the autocutter module, you must follow the steps below. If you do not follow them, it could cause an autocutter operation failure.

(1)Secure the right side screw.

(2)Secure the left side screw.

- 46 -

Image 48

Contents TM200 Appendix a Printer Parts Printer cover Control Panel Cutter cover Cover open buttonPrinting Specifications Character sizePaper Specifications Electrical SpecificationsAutocutter Printable AreaEMI and Safety Standards Applied External Dimensions and WeightReliability Conditions of acceptabilityEnvironmental Conditions HumidityMajor Component Specifications ConnectorsPower Supply Connector TM200 Printer MechanismDrawer Kick-out Connector InterfacesRS-232 serial interface Switching between online and offline TM200 serial printer status and signalsButtons, Switches, and Panel Lights Power SwitchType Rocker switch Function Panel ButtonDIP Switches Panel lightsSerial interface model OFF Transmission Speed Parallel interface model DIP switch EPPSelf-test Running the self testHexadecimal Dump Hexadecimal Dump FunctionPerforming a Hexadecimal Dump Ending hexadecimal dumpingStandard Accessories Paper SensorsCover Open Button Cover Open SensorExternal Power Supply Specifications Input specificationsOptions ConsumablesOutput specifications Component Connections TM200 Printer MechanismPrinter Mechanism Thermal head Module Frame cover openMain Circuit Board Unit Autocutter ModuleAutocutter operation Cutter blade knobCPU peripheral logic circuits TM200 Control CircuitPower Supply Circuit Control Panel Control CircuitDrawer Kick Control Circuit Switch Circuit Board I/F Circuit BoardTransport Precautions Setup PrecautionsOperational Precautions HandlingPaper Precautions Loading paper rollPage Problem Solving ErrorsClearing Paper Jams Inspection and Maintenance Maintenance ProceduresCleaning Thermal head Platen roller on receipt side Paper roll end sensor on receipt sideExterior dirt Dirt, lint, dustTroubleshooting Symptoms and SolutionsError Types and Processing Printer Operation when an Error OccursData Receive Error only with the serial interface model Page Before Starting disassembly, assembly, and adjustment Using this ManualDisassembly, Assembly, and Adjustment Procedures TitlesTM200 Disassembly, Assembly, and Adjustment Please following the steps for disassemblyDoor sensor block Page Paper out sensor block and paper sensor block Page Page Autocutter module Page Thermal head module Page Page Main circuit board Page Page Specifications Switching between online and offlineInterface Pin Assignments Appendix B Exploded diagram Appendix C Panel lights and indicators Page Appendix D Parts number list

TM200 specifications

The Epson TM200 series represents a significant advancement in the realm of receipt printers, catering to a diverse range of business needs. Known for its reliability, speed, and compact design, the TM200 is engineered specifically to meet the demands of retail, hospitality, and other environments requiring efficient transaction processing.

One of the standout features of the Epson TM200 is its enhanced printing speed, capable of producing receipts at an impressive rate of up to 200 mm per second. This rapid output reduces the time customers spend waiting for their transactions to be completed, thereby increasing throughput during peak business hours. The device employs advanced thermal printing technology, which not only ensures high-quality output but also minimizes the need for ink or toner.

The TM200 series is designed with versatility in mind. It supports multiple connectivity options, including USB, serial, and Ethernet interfaces, allowing for seamless integration into existing systems. Additionally, its compatibility with various operating systems enhances its usability across a wide spectrum of platforms, making it a flexible choice for businesses.

Another notable characteristic of the TM200 is its compact footprint. The printer's design maximizes counter space, making it an ideal solution for environments with limited room. Despite its small size, the TM200 does not compromise on performance, delivering robust features in a sleek form factor.

Built with durability in mind, the Epson TM200 boasts an extended lifespan, significantly reducing the need for frequent replacements. Its intuitive paper load mechanism ensures quick and easy paper changes, further enhancing operational efficiency.

Moreover, the TM200 series utilizes Epson's unique Economode technology, which optimizes power consumption without compromising on performance. This eco-friendly approach not only lowers operational costs but also aligns with sustainability goals pursued by many modern businesses.

In summary, the Epson TM200 series combines high-speed performance, versatile connectivity, compact design, and durability, making it an ideal choice for businesses seeking reliable and efficient receipt printing solutions. Whether placed in a retail store, restaurant, or other commercial environments, the TM200 stands out as a formidable option that meets contemporary business needs with ease and efficiency.