Epson TM-T88II user manual Installing or Replacing the Paper Roll

Page 21

Installing or Replacing the Paper Roll

Note:

Be sure to use paper rolls that meet the specifications. Do not use paper rolls that have the paper glued to the core, because the printer cannot detect the paper end correctly.

1.Make sure the printer is not receiving data; otherwise, data may be lost.

2.Open the paper roll cover by pressing the cover-open button. If the cover-open button will not open the cover, see page 3-4 or 3-6 in Troubleshooting.

POWER

ERROR

OUTPAPER

FEEDEED

3. Remove the used paper roll core, if there is one.

Setting Up the Printer 1-7

Image 21

Contents TM-T88II Series Labels Printer Parts and LabelsInstalling and Replacing Paper Setting Up the PrinterSolving Problems Quick ReferencePage EMC and Safety Standards Applied Product Name TM-T88II Model Name M129BIii CE Marking FCC Compliance StatementFor American Users Gereäuschpegel Setting Up and Using About This ManualReference Introduction FeaturesPrinting Application SoftwareViii Introduction Options and AccessoriesSpecified Thermal Roll Paper NTP080-80 Ordering Paper and SuppliesOther Qualified Suppliers for Thermal Paper Jujo Thermal Oy FinlandKanzaki Specialty Papers, Inc Contents Xii Appendix a DIP Switch and Paper Near End SettingsSetting Up the Printer Setting Up the PrinterUnpacking Connecting the Cables and Grounding the Printer Connecting the computer2Setting Up the Printer Connecting the Drawer Anschließen der Schublade 4Setting Up the PrinterGrounding the Printer Connecting the Power SupplyPage Installing or Replacing the Paper Roll 8Setting Up the Printer Tear off the paper as shown 10Setting Up the Printer Using the Power Switch CoverSelf Test Running the self testSelf test printing Please press the Paper Feed button 12Setting Up the Printer Adjustments and SettingsUsing the Printer Using the PrinterOperating the Control Panel Control PanelPanel lights 2Using the PrinterTroubleshooting TroubleshootingGeneral problems Printing problemsError light is off, but nothing is printed 2TroubleshootingPrinting is poor Cleaning the print head Paper handling problemsPaper is jammed inside the printer 4Troubleshooting Auto cutter is jammed Auto cutter problems6Troubleshooting Abcdefgh Hexadecimal Dump8Troubleshooting Printing Specifications Reference InformationReference Information 2Reference Information Line spacing default 4.23 mm 1/6Paper roll single-ply Size Paper SpecificationsElectrical Characteristics CurrentConsumption at Reliability TemperatureEnvironmental Conditions Life6Reference Information Setting the DIP Switches DIP Switch and Paper Near End SettingsDIP switch functions Serial interface specifications2DIP Switch and Paper Near End Settings Print Density Selection DIP Switch and Paper Near End Settings A-34DIP Switch and Paper Near End Settings Parallel interface specificationsDIP Switch and Paper Near End Settings A-5 6DIP Switch and Paper Near End Settings Changing the DIP switch settingsDIP Switch and Paper Near End Settings A-7 Adjusting the Paper Near End Detector8DIP Switch and Paper Near End Settings Page 1999.12