Epson TM-T88II user manual Line spacing default 4.23 mm 1/6, 2Reference Information

Page 38

Printing speed — Approximately 42 mm/ second

when a ladder bar (approximately 1.7’’/ second) code is printed:

Notes:

Printing speed may be slower, depending on the data transmission speed and the combination of control commands.

There may be variations in printing after switching the mode of the printing speed. To prevent this for logo printing, it is recommended that you use a downloaded bit image. (Changes in printing speed do not occur during downloaded bit image printing).

Paper feeding speed: Approximately 120 mm/second (approximately 4.72”/second) continuous paper feeding

Line spacing (default): 4.23 mm (1/6”)

Programmable by control command.

Number of characters: Alphanumeric characters: 95 International characters: 32

Extended graphics: 128 ⋅ 7 pages (including one space page)

Kanji characters: JIS-Level 1, Level 2 (JIS X0208-1990)

Character structure: Font A: 12 ⋅ 24 (including 2-dot spacing horizontally)

Font B: 9 ⋅ 17 (including 2-dot spacing horizontally)

Kanji: 24 ⋅ 24

Font A is the default

4-2Reference Information

Image 38

Contents TM-T88II Series Printer Parts and Labels LabelsSolving Problems Setting Up the PrinterInstalling and Replacing Paper Quick ReferencePage Iii EMC and Safety Standards AppliedProduct Name TM-T88II Model Name M129B For American Users CE MarkingFCC Compliance Statement Gereäuschpegel Reference Setting Up and UsingAbout This Manual Printing FeaturesIntroduction Application SoftwareOptions and Accessories Viii IntroductionOrdering Paper and Supplies Specified Thermal Roll Paper NTP080-80Kanzaki Specialty Papers, Inc Other Qualified Suppliers for Thermal PaperJujo Thermal Oy Finland Contents Appendix a DIP Switch and Paper Near End Settings XiiUnpacking Setting Up the PrinterSetting Up the Printer 2Setting Up the Printer Connecting the Cables and Grounding the PrinterConnecting the computer Connecting the Drawer 4Setting Up the Printer Anschließen der SchubladeConnecting the Power Supply Grounding the PrinterPage Installing or Replacing the Paper Roll 8Setting Up the Printer Tear off the paper as shown Self Test Using the Power Switch Cover10Setting Up the Printer Running the self testSelf test printing Please press the Paper Feed button Adjustments and Settings 12Setting Up the PrinterOperating the Control Panel Using the PrinterUsing the Printer Control Panel2Using the Printer Panel lightsGeneral problems TroubleshootingTroubleshooting Printing problemsPrinting is poor Error light is off, but nothing is printed2Troubleshooting Paper is jammed inside the printer Cleaning the print headPaper handling problems 4Troubleshooting Auto cutter problems Auto cutter is jammed6Troubleshooting Hexadecimal Dump Abcdefgh8Troubleshooting Reference Information Printing SpecificationsReference Information Line spacing default 4.23 mm 1/6 2Reference InformationPaper Specifications Paper roll single-ply SizeConsumption at Electrical CharacteristicsCurrent Environmental Conditions TemperatureReliability Life6Reference Information DIP switch functions DIP Switch and Paper Near End SettingsSetting the DIP Switches Serial interface specifications2DIP Switch and Paper Near End Settings DIP Switch and Paper Near End Settings A-3 Print Density SelectionParallel interface specifications 4DIP Switch and Paper Near End SettingsDIP Switch and Paper Near End Settings A-5 Changing the DIP switch settings 6DIP Switch and Paper Near End SettingsAdjusting the Paper Near End Detector DIP Switch and Paper Near End Settings A-78DIP Switch and Paper Near End Settings Page 1999.12