Printing Maintenance
To print a nozzle check pattern in Windows:
1.Make sure the printer is on and
paper loaded.
2.Click Start, then Settings, then Printers.
3.
4.Click the Maintenance tab, then click the Nozzle Check button.
5.Click OK to start the nozzle test. The nozzle test pattern will print.
The Maintenance tab may vary for Windows NT 4.0 and
Windows 2000.
6.Check the printed nozzle check pattern. If part of the top pattern is missing, see “Cleaning the Printhead” on page 22 for procedures.
To print a nozzle check pattern in Mac OS:
1.Make sure the printer is on and paper
loaded.
2.In a software application, click File, then Page Setup.
3.Click Utilities. The Canon S600 Printer Utility window will appear.
4.Select Test Print from the
5.Click the Nozzle Check button. When prompted, click OK. The nozzle test pattern will print.
6.When done, click Close.
7.Check the printed nozzle check pattern. If part of the top pattern is missing, see “Cleaning the Printhead” on page 22 for procedures.
21