Canon 1650 user manual Community Name, TCP Restriction Enabled, TCP Restriction Mode

Page 42

42

Print Server Management and Configuration

AXIS 1650 User’s Manual

 

 

 

Community Name:

Specify the community name for SNMP. Up to 32 alphanumeric characters can be entered. Default = public

Restrictions

TCP Restriction Enabled

Users specified in the IP Address List are rejected or accepted, depending on TCP Restriction Mode, to send printjobs over the print server.

Default = No

TCP Restriction Mode

Accept Users specified in [TCP Restriction Address List] are permitted to send printjobs over the print server.

Reject Users specified in [TCP Restriction Address List] are rejected from sending printjobs over the print server.

Default = Accept

TCP Restriction IP Address List:

Users specified are rejected or accepted to print using the print server. IP addresses or ranges of IP addresses can be specified:

Example IP addresses: 10.13.16.150, 10.13.16.151

Example IP address range: 10.13.16.160-0.13.16.170

Default = <blank>

If your print server is connected to a CAPT 1.0 printer you will receive an error message stating Network Error if you are not allowed to print with this print server.

SNMP Restriction Enabled:

Users specified in SNMP restriction IP address list are rejected or accepted, depending on SNMP restriction mode. To specify, browse the settings for the device using SNMP. Default = No

Image 42
Contents Axis 1650 User’s Manual Safety Notices Electromagnetic Compatibility EMCOther Trademark Acknowledgments LiabilityAxis’ Trademarks Patent informationTable of Contents About this Manual About AxisSupport Services Package Contents Product OverviewAxis 1650 Network Print Server Supported PrintersSupported Environments Installation and Integration Configuration and ManagementPrinting Protocol TCP/IP Speed Printer Ports Print Server Installation Connect the HardwarePrint Server Installation Axis 1650 User’s Manual Set the IP Address Set a Static IP Address using Axis IP JumpStarter Axis 1650 User’s Manual Print Server Installation Arp -sIP address Ethernet address ping -l 479 IP address Set a Static IP Address using ARP in Unix Arp -s192.168.3.191 00408c181cf0 temp ping -s 479Set an IP Address with NetSpot Device Installer software Install NetSpot Device InstallerSet the IP address using NetSpot Device Installer After you have finished the configuration, click OK IP Address Host Names Windows Installation Installing Printer Ports using Axis Capt Print MonitorAxis 1650 User’s Manual Windows Installation Must be checked Windows XP/Server WindowsWindows Installation Axis 1650 User’s Manual Axis 1650 User’s Manual Windows Installation Windows Installation Axis 1650 User’s Manual Axis 1650 User’s Manual Windows Installation Windows Installation Axis 1650 User’s Manual Example AXIS560B35 Remote Printer PortWindows Installation Axis 1650 User’s Manual Axis 1650 User’s Manual Windows Installation Windows Installation Axis 1650 User’s Manual Print Server Management Configuration Configuration OverviewUser mode Admin modePrint Server Management from the Embedded Web Pages Accessing the Embedded Web Pages Available Services from the User Mode Print Server NameSystem Location Serial Number LanguageAvailable Services from the Admin Mode System NameSystem Contact Root PasswordSnmp Enabled System Contact Phone NbrSnmp Restriction Enabled TCP Restriction EnabledTCP Restriction Mode Community NameSLP Restriction Mode Snmp Restriction ModeSLP Restriction Enabled Snmp Restriction IP Address ListSoftware Default Parameter ListRestart LPD Banner Page Mode Frame TypeRarp Enabled Dhcp EnabledBootp Enabled IP AddressSubnet Mask Default RouterDNS Dynamic Update DNS Server AddressWins Server Address Wins EnabledSLP enabled Wins Host NameSntp update interval Troubleshoot and UpgradeServer Report Axis Online Services Contact InformationStatistics Print Server Management Using FTP Editing the config fileFTP Help Ftp npserver connected to npserverPrint Server Management Using Snmp General InformationTest Button Print a TestUpgrading the Firmware Upgrading using FTP Type cd AxisAxis 1650 User’s Manual Upgrading the Firmware Follow these steps to enable unicast network communication Appendix a Enabling Unicast Network CommunicationAxis 1650 User’s Manual Windows XP/Server Axis 1650 User’s Manual Appendix B Internet Connection Firewall in Windows XP SP2 Go to Start Control Panel Security Center Select FirewallClick Exceptions and highlight Axis Capt Port Axis 1650 User’s Manual Supported Protocols Technical SpecificationsSupported Systems Network ManagementDimensions Wired Network AttachmentsPower Consumption Supported LanguagesApprovals SafetyEnvironmental HardwareBootp IndexAxis 1650 User’s Manual Remote Printer Port Restart Root Password Unix