Canon user manual Axis 1650 User’s Manual

Page 59

AXIS 1650 User’s Manual

59

 

 

6. Open the config file using any text editor:

Make sure this parameter is set to YES.

7.Locate the parameter named USE_IP_PORT_NAME: type YES

8.Once the editing is complete, save the file as config

9.In the Command prompt window, upload the configuration file to the AXIS 1650 by typing put config CONFIG

10.To exit FTP, type quit

Note: This will also change the Print Server Name parameter so that it is based on the print server’s IP address, with “_” replacing the “.” in the address.

Example: If the print server’s IP address is 192.168.3.191 the Print Server Name parameter will be changed to 192_168_3_191.

Image 59
Contents Axis 1650 User’s Manual Electromagnetic Compatibility EMC Safety NoticesPatent information LiabilityAxis’ Trademarks Other Trademark AcknowledgmentsTable of Contents About Axis About this ManualSupport Services Product Overview Package ContentsSupported Environments Axis 1650 Network Print ServerSupported Printers Printing Protocol TCP/IP Speed Installation and IntegrationConfiguration and Management Printer Ports Connect the Hardware Print Server InstallationPrint Server Installation Axis 1650 User’s Manual Set the IP Address Set a Static IP Address using Axis IP JumpStarter Axis 1650 User’s Manual Print Server Installation Arp -sIP address Ethernet address ping -l 479 IP address Arp -s192.168.3.191 00408c181cf0 temp ping -s 479 Set a Static IP Address using ARP in UnixInstall NetSpot Device Installer Set an IP Address with NetSpot Device Installer softwareSet the IP address using NetSpot Device Installer After you have finished the configuration, click OK IP Address Host Names Installing Printer Ports using Axis Capt Print Monitor Windows InstallationAxis 1650 User’s Manual Windows Installation Must be checked Windows Windows XP/ServerWindows Installation Axis 1650 User’s Manual Axis 1650 User’s Manual Windows Installation Windows Installation Axis 1650 User’s Manual Axis 1650 User’s Manual Windows Installation Windows Installation Axis 1650 User’s Manual Remote Printer Port Example AXIS560B35Windows Installation Axis 1650 User’s Manual Axis 1650 User’s Manual Windows Installation Windows Installation Axis 1650 User’s Manual Configuration Overview Print Server Management ConfigurationPrint Server Management from the Embedded Web Pages User modeAdmin mode Accessing the Embedded Web Pages System Location Available Services from the User ModePrint Server Name Language Serial NumberSystem Name Available Services from the Admin ModeSystem Contact Phone Nbr Root PasswordSnmp Enabled System ContactCommunity Name TCP Restriction EnabledTCP Restriction Mode Snmp Restriction EnabledSnmp Restriction IP Address List Snmp Restriction ModeSLP Restriction Enabled SLP Restriction ModeRestart Software DefaultParameter List Frame Type LPD Banner Page ModeIP Address Dhcp EnabledBootp Enabled Rarp EnabledDNS Server Address Default RouterDNS Dynamic Update Subnet MaskWins Host Name Wins EnabledSLP enabled Wins Server AddressServer Report Sntp update intervalTroubleshoot and Upgrade Statistics Axis Online ServicesContact Information Editing the config file Print Server Management Using FTPFtp npserver connected to npserver FTP HelpGeneral Information Print Server Management Using SnmpPrint a Test Test ButtonUpgrading the Firmware Type cd Axis Upgrading using FTPAxis 1650 User’s Manual Upgrading the Firmware Appendix a Enabling Unicast Network Communication Follow these steps to enable unicast network communicationAxis 1650 User’s Manual Windows XP/Server Axis 1650 User’s Manual Go to Start Control Panel Security Center Select Firewall Appendix B Internet Connection Firewall in Windows XP SP2Click Exceptions and highlight Axis Capt Port Axis 1650 User’s Manual Network Management Technical SpecificationsSupported Systems Supported ProtocolsSupported Languages Wired Network AttachmentsPower Consumption DimensionsHardware SafetyEnvironmental ApprovalsIndex BootpAxis 1650 User’s Manual Remote Printer Port Restart Root Password Unix